lkml.org 
[lkml]   [2016]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/5] net: phy: dp83848: Add macro for dp83848 compatible devices
Date
Add a helper macro for defining dp83848 compatible phy devices.
Update copyright info.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
drivers/net/phy/dp83848.c | 41 ++++++++++++++++++++++-------------------
1 file changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/net/phy/dp83848.c b/drivers/net/phy/dp83848.c
index 5e14e62..4e78f54 100644
--- a/drivers/net/phy/dp83848.c
+++ b/drivers/net/phy/dp83848.c
@@ -1,7 +1,7 @@
/*
* Driver for the Texas Instruments DP83848 PHY
*
- * Copyright (C) 2015 Texas Instruments Inc.
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -70,25 +70,28 @@ static struct mdio_device_id __maybe_unused dp83848_tbl[] = {
};
MODULE_DEVICE_TABLE(mdio, dp83848_tbl);

-static struct phy_driver dp83848_driver[] = {
- {
- .phy_id = DP83848_PHY_ID,
- .phy_id_mask = 0xfffffff0,
- .name = "TI DP83848",
- .features = PHY_BASIC_FEATURES,
- .flags = PHY_HAS_INTERRUPT,
-
- .soft_reset = genphy_soft_reset,
- .config_init = genphy_config_init,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .config_aneg = genphy_config_aneg,
- .read_status = genphy_read_status,
+#define DP83848_PHY_DRIVER(_id, _name) \
+ { \
+ .phy_id = _id, \
+ .phy_id_mask = 0xfffffff0, \
+ .name = _name, \
+ .features = PHY_BASIC_FEATURES, \
+ .flags = PHY_HAS_INTERRUPT, \
+ \
+ .soft_reset = genphy_soft_reset, \
+ .config_init = genphy_config_init, \
+ .suspend = genphy_suspend, \
+ .resume = genphy_resume, \
+ .config_aneg = genphy_config_aneg, \
+ .read_status = genphy_read_status, \
+ \
+ /* IRQ related */ \
+ .ack_interrupt = dp83848_ack_interrupt, \
+ .config_intr = dp83848_config_intr, \
+ }

- /* IRQ related */
- .ack_interrupt = dp83848_ack_interrupt,
- .config_intr = dp83848_config_intr,
- },
+static struct phy_driver dp83848_driver[] = {
+ DP83848_PHY_DRIVER(DP83848_PHY_ID, "TI DP83848 10/100 Mbps PHY"),
};
module_phy_driver(dp83848_driver);

--
2.7.0
\
 
 \ /
  Last update: 2016-02-07 19:01    [W:0.084 / U:0.308 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site