lkml.org 
[lkml]   [2016]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: Data corruption on serial interface under load
From
On Thu, Feb 4, 2016 at 10:06 PM, Peter Hurley <peter@hurleysoftware.com> wrote:
> Hi Andy,
>
> On 02/04/2016 10:55 AM, Andy Shevchenko wrote:
>> Hi!
>>
>> Today I observed interesting bug / feature of uart layer in the kernel.
>> I do have a setup which connects two identical devices by serial line.
>> I run data transferring in one direction and got data corruption on
>> receiver side (in uart layer, not the driver).
>>
>> Here is the dump from test suite and real data from 8250 registers:
>>
>> === 8< ===
>>
>> Needed 16 reads 0 writes Oh oh, inconsistency at pos 1 (0x1).
>>
>> Original sample:
>> 00000000: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 .ELF............
>> 00000010: 02 00 03 00 01 00 00 00 19 8d 04 08 34 00 00 00 ............4...
>> 00000020: 2c f2 00 00 00 00 00 00 34 00 20 00 04 00 28 00 ,.......4. ...(.
>>
>> Received sample:
>> 00000000: 7f 00 45 00 4c 00 46 00 01 00 01 00 01 00 00 00 ..E.L.F.........
>> 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
>> 00000020: 02 00 00 00 03 00 00 00 01 00 00 00 00 19 8d 04 ................
>> loops 1 / 1
>>
>> cts: 0 dsr: 0 rng: 0 dcd: 0 rx: 53434 tx: 0 frame 0 ovr 34201 par: 0
>> brk: 0 buf_ovrr: 0
>>
>> === 8< ===
>>
>> R 356.360109 IIR 0xc4 RDI interrupt
>> R 356.360114 LSR 0x63 DR + OE
>> R 356.360119 RX 0x7f
>> R 356.360124 LSR 0x63 DR + still OE
>> R 356.360128 RX 0x45
>> R 356.360133 LSR 0x63 DR + still OE
>> R 356.360137 RX 0x4c
>> R 356.360142 LSR 0x63 DR + still OE
>> R 356.360147 RX 0x46
>> R 356.360151 LSR 0x63 DR + still OE
>> R 356.360156 RX 0x01
>> R 356.360160 LSR 0x63 DR + still OE
>> R 356.360165 RX 0x01
>> R 356.360169 LSR 0x63
>> R 356.360174 RX 0x01
>>
>> As we can see the data is corrupted on Linux side. Can we somehow fix
>> this bug/feature?
>
> Not quite sure what you see as the issue.
>
> 1) That is a lot of overruns. Is that part of the test or are the overruns
> a regression?

This is part of the other problem which I'm investigating.

> 2) If you mean the NUL bytes for overruns, I could have some functional mode
> mis-branched in the N_TTY line discipline.

Yeah, this one.

> What are the termios settings
> on the rx side?

I'm using this [1] tool with small patch applied that enables internal
loopback (TCIOM_LOOP).

[1] https://git.breakpoint.cc/cgit/bigeasy/serialcheck.git/

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2016-02-05 00:01    [W:0.121 / U:0.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site