lkml.org 
[lkml]   [2016]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC][PATCH 3/3 v2] sched: Add bandwidth ratio to /proc/sched_debug
Hi,

On 03/02/16 11:57, Steven Rostedt wrote:
> From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
>
> Playing with SCHED_DEADLINE and cpusets, I found that I was unable to create
> new SCHED_DEADLINE tasks, with the error of EBUSY as if the bandwidth was
> already used up. I then realized there wa no way to see what bandwidth is
> used by the runqueues to debug the issue.
>
> By adding the dl_bw->bw and dl_bw->total_bw to the output of the deadline
> info in /proc/sched_debug, this allows us to see what bandwidth has been
> reserved and where a problem may exist.
>
> For example, before the issue we see the ratio of the bandwidth:
>
> # cat /proc/sys/kernel/sched_rt_runtime_us
> 950000
> # cat /proc/sys/kernel/sched_rt_period_us
> 1000000
>
> # grep dl /proc/sched_debug
> dl_rq[0]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[1]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[2]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[3]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[4]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[5]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[6]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
> dl_rq[7]:
> .dl_nr_running : 0
> .dl_bw->bw : 996147
> .dl_bw->total_bw : 0
>

I think this is already quite useful. But, do you think we can also
display information about the root_domain (like the span for example)?
Or do we have that some place else already?

Thanks,

- Juri

\
 
 \ /
  Last update: 2016-02-03 19:01    [W:0.050 / U:28.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site