lkml.org 
[lkml]   [2016]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 01/10] serial: mvebu-uart: initial support for Armada-3700 serial port
Date
Hi Mark,

On mar., févr. 02 2016, Mark Rutland <mark.rutland@arm.com> wrote:

> On Tue, Feb 02, 2016 at 07:07:39PM +0100, Gregory CLEMENT wrote:
>> From: Wilson Ding <dingwei@marvell.com>
>>
>> Armada-3700's uart is a simple serial port, which doesn't
>> support. Configuring the modem control lines. The uart port has a 32
>> bytes Tx FIFO and a 64 bytes Rx FIFO
>>
>> The uart driver implements the uart core operations. It also support the
>> system (early) console based on Armada-3700's serial port.
>>
>> Known Issue:
>>
>> The uart driver currently doesn't support clock programming, which means
>> the baud-rate stays with the default value configured by the bootloader
>> at boot time
>
> To ensure that the bootloader and kernel match, it's best to place the
> rate in the stdout-path property (as in
> Documentation/devicetree/bindings/chosen.txt).
>
> Presumably that is what you want?

It is done in patch 7.

>
> Is it difficutl to add clock programming?

Currently there is no clock tree support before adding it I would like
to be able to test it.

Thanks,

Gregory

>
>>
>> [gregory.clement@free-electrons.com: Rewrite many part which are too long
>> to enumerate]
>>
>> Signed-off-by: Wilson Ding <dingwei@marvell.com>
>> Signed-off-by: Nadav Haklai <nadavh@marvell.com>
>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
>> ---
>> .../devicetree/bindings/tty/serial/mvebu-uart.txt | 13 +
>> Documentation/kernel-parameters.txt | 6 +
>> drivers/tty/serial/Kconfig | 22 +
>> drivers/tty/serial/Makefile | 1 +
>> drivers/tty/serial/mvebu-uart.c | 649 +++++++++++++++++++++
>> include/uapi/linux/serial_core.h | 3 +
>> 6 files changed, 694 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt
>> create mode 100644 drivers/tty/serial/mvebu-uart.c
>>
>> diff --git a/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt
>> new file mode 100644
>> index 000000000000..6087defd9f93
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/tty/serial/mvebu-uart.txt
>> @@ -0,0 +1,13 @@
>> +* Marvell UART : Non standard UART used in some of Marvell EBU SoCs (e.g., Armada-3700)
>> +
>> +Required properties:
>> +- compatible: "marvell,armada-3700-uart"
>> +- reg: offset and length of the register set for the device.
>> +- interrupts: device interrupt
>> +
>> +Example:
>> + serial@12000 {
>> + compatible = "marvell,armada-3700-uart";
>> + reg = <0x12000 0x400>;
>> + interrupts = <43>;
>> + };
>
> There are no external clock inputs?
>
>> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
>> index 87d40a72f6a1..198f6bd56e84 100644
>> --- a/Documentation/kernel-parameters.txt
>> +++ b/Documentation/kernel-parameters.txt
>> @@ -1058,6 +1058,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
>> A valid base address must be provided, and the serial
>> port must already be setup and configured.
>>
>> + mvebu_uart,<addr>
>> + Start an early, polled-mode console on an some mvebu
>> + SoC (as the Armada-3700) serial port at the specified
>> + address. The serial port must already be setup and
>> + configured. Options are not yet supported.
>> +
>
> Does the the mvebu UART vary between platforms at all?
>
> Thanks,
> Mark.

--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

\
 
 \ /
  Last update: 2016-02-03 18:21    [W:0.192 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site