lkml.org 
[lkml]   [2016]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] psmouse: added BYD touchpad driver
From
Date
New patch vs 98ee377144935857d8ad5d7d70cdab1da4ede32e on 
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input follows.
Confirmed builds and works as expected with that kernel branch.

Signed-off-by: Richard Pospesel <pospeselr@gmail.com>
---
diff --git a/drivers/input/mouse/byd.c b/drivers/input/mouse/byd.c
index 9425e0f..a880adb 100644
--- a/drivers/input/mouse/byd.c
+++ b/drivers/input/mouse/byd.c
@@ -1,337 +1,586 @@
/*
- * BYD TouchPad PS/2 mouse driver
+ * BYD BTP-10463 touchpad PS/2 mouse driver
*
- * Copyright (C) 2015 Chris Diamand <chris@diamand.org>
+ * Copyright (C) 2015, Tai Chi Minh Ralph Eastwood
+ * Copyright (C) 2015, Martin Wimpress
+ * Copyright (C) 2015, Jay Kuri
+ * Copyright (C) 2015, Richard Pospesel
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as
published by
* the Free Software Foundation.
+ *
+ * Protocol of BYD Touch Pad reverse-engineered from windows driver:
+ * filename: "byd touchpad driver - win7, 8, 8.1 - 2.4.1.102.zip"
+ * sha1: 97a0eca8edc482bf9d08ab9509084a514dad4c4b
+ * datasheet: http://bydit.com/userfiles/file/BTP10463-XXX.pdf
+ *
*/
+#include <linux/types.h>
+#include <linux/kernel.h>

-#include <linux/delay.h>
#include <linux/input.h>
-#include <linux/libps2.h>
#include <linux/serio.h>
+#include <linux/slab.h>
+#include <linux/libps2.h>

#include "psmouse.h"
#include "byd.h"

-#define PS2_Y_OVERFLOW BIT_MASK(7)
-#define PS2_X_OVERFLOW BIT_MASK(6)
-#define PS2_Y_SIGN BIT_MASK(5)
-#define PS2_X_SIGN BIT_MASK(4)
-#define PS2_ALWAYS_1 BIT_MASK(3)
-#define PS2_MIDDLE BIT_MASK(2)
-#define PS2_RIGHT BIT_MASK(1)
-#define PS2_LEFT BIT_MASK(0)
+#define BYD_MODEL_ID_LEN 2
+#define BYD_CMD_PAIR(c) ((1 << 12) | (c))
+#define BYD_CMD_PAIR_R(r, c) ((1 << 12) | (r << 8) | (c))
+
+/* BYD pad constants */

/*
- * The touchpad reports gestures in the last byte of each packet. It
can take
- * any of the following values:
+ * true device resolution is unknown, however experiments show the
+ * resolution is about 111 units/mm
+ * absolute coordinate packets are in the range 0-255 for both X and y
+ * we pick ABS_X/ABS_Y dimensions which are multiples of 256 and in
+ * the right ballpark given the touchpad's physical dimensions and estimate
+ * resolution per spec sheet, device active area dimensions are
+ * 101.6 x 60.1 mm
*/

-/* One-finger scrolling in one of the edge scroll zones. */
-#define BYD_SCROLLUP 0xCA
-#define BYD_SCROLLDOWN 0x36
-#define BYD_SCROLLLEFT 0xCB
-#define BYD_SCROLLRIGHT 0x35
-/* Two-finger scrolling. */
-#define BYD_2DOWN 0x2B
-#define BYD_2UP 0xD5
-#define BYD_2LEFT 0xD6
-#define BYD_2RIGHT 0x2A
-/* Pinching in or out. */
-#define BYD_ZOOMOUT 0xD8
-#define BYD_ZOOMIN 0x28
-/* Three-finger swipe. */
-#define BYD_3UP 0xD3
-#define BYD_3DOWN 0x2D
-#define BYD_3LEFT 0xD4
-#define BYD_3RIGHT 0x2C
-/* Four-finger swipe. */
-#define BYD_4UP 0xCD
-#define BYD_4DOWN 0x33
+#define BYD_CONST_PAD_WIDTH 11264
+#define BYD_CONST_PAD_HEIGHT 6656
+#define BYD_CONST_PAD_RESOLUTION 111

-int byd_detect(struct psmouse *psmouse, bool set_properties)
+
+/* BYD commands reverse engineered from windows driver */
+
+/*
+ * swipe gesture from off-pad to on-pad
+ * 0 : disable
+ * 1 : enable
+ */
+#define BYD_CMD_SET_OFFSCREEN_SWIPE 0xcc
+/*
+ * tap and drag delay time
+ * 0 : disable
+ * 1 - 8 : least to most delay
+ */
+#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0xcf
+/*
+ * physical buttons function mapping
+ * 0 : enable
+ * 4 : normal
+ * 5 : left button custom command
+ * 6 : right button custom command
+ * 8 : disable
+ */
+#define BYD_CMD_SET_PHYSICAL_BUTTONS 0xd0
+/*
+ * absolute mode (1 byte X/Y resolution)
+ * 0 : disable
+ * 2 : enable
+ */
+#define BYD_CMD_SET_ABSOLUTE_MODE 0xd1
+/*
+ * two finger scrolling
+ * 1 : vertical
+ * 2 : horizontal
+ * 3 : vertical + horizontal
+ * 4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL 0xd2
+/*
+ * handedness
+ * 1 : right handed
+ * 2 : left handed
+ */
+#define BYD_CMD_SET_HANDEDNESS 0xd3
+/*
+ * tap to click
+ * 1 : enable
+ * 2 : disable
+ */
+#define BYD_CMD_SET_TAP 0xd4
+/*
+ * tap and drag
+ * 1 : tap and hold to drag
+ * 2 : tap and hold to drag + lock
+ * 3 : disable
+ */
+#define BYD_CMD_SET_TAP_DRAG 0xd5
+/*
+ * touch sensitivity
+ * 1 - 7 : least to most sensitive
+ */
+#define BYD_CMD_SET_TOUCH_SENSITIVITY 0xd6
+/*
+ * one finger scrolling
+ * 1 : vertical
+ * 2 : horizontal
+ * 3 : vertical + horizontal
+ * 4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL 0xd7
+/*
+ * one finger scrolling function
+ * 1 : free scrolling
+ * 2 : edge motion
+ * 3 : free scrolling + edge motion
+ * 4 : disable
+ */
+#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0xd8
+/*
+ * sliding speed
+ * 1 - 5 : slowest to fastest
+ */
+#define BYD_CMD_SET_SLIDING_SPEED 0xda
+/*
+ * edge motion
+ * 1 : disable
+ * 2 : enable when dragging
+ * 3 : enable when dragging and pointing
+ */
+#define BYD_CMD_SET_EDGE_MOTION 0xdb
+/*
+ * left edge region size
+ * 0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_LEFT_EDGE_REGION 0xdc
+/*
+ * top edge region size
+ * 0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_TOP_EDGE_REGION 0xdd
+/*
+ * disregard palm press as clicks
+ * 1 - 6 : smallest to largest
+ */
+#define BYD_CMD_SET_PALM_CHECK 0xde
+/* right edge region size
+ * 0 - 7 : smallest to largest width
+ */
+#define BYD_CMD_SET_RIGHT_EDGE_REGION 0xdf
+/*
+ * bottom edge region size
+ * 0 - 9 : smallest to largest height
+ */
+#define BYD_CMD_SET_BOTTOM_EDGE_REGION 0xe1
+/*
+ * multitouch gestures
+ * 1 : enable
+ * 2 : disable
+ */
+#define BYD_CMD_SET_MULTITOUCH 0xe3
+/*
+ * edge motion speed
+ * 0 : control with finger pressure
+ * 1 - 9 : slowest to fastest
+ */
+#define BYD_CMD_SET_EDGE_MOTION_SPEED 0xe4
+/*
+ * two finger scolling function
+ * 0 : free scrolling
+ * 1 : free scrolling (with momentum)
+ * 2 : edge motion
+ * 3 : free scrolling (with momentum) + edge motion
+ * 4 : disable
+ */
+#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0xe5
+
+/* BYD Packets */
+
+#define BYD_PKT_RELATIVE 0x00
+#define BYD_PKT_ABSOLUTE 0xf8
+#define BYD_PKT_PINCH_IN 0xd8
+#define BYD_PKT_PINCH_OUT 0x28
+#define BYD_PKT_ROTATE_CLOCKWISE 0x29
+#define BYD_PKT_ROTATE_ANTICLOCKWISE 0xd7
+#define BYD_PKT_TWO_FINGER_SCROLL_RIGHT 0x2a
+#define BYD_PKT_TWO_FINGER_SCROLL_DOWN 0x2b
+#define BYD_PKT_TWO_FINGER_SCROLL_UP 0xd5
+#define BYD_PKT_TWO_FINGER_SCROLL_LEFT 0xd6
+#define BYD_PKT_THREE_FINGER_SWIPE_RIGHT 0x2c
+#define BYD_PKT_THREE_FINGER_SWIPE_DOWN 0x2d
+#define BYD_PKT_THREE_FINGER_SWIPE_UP 0xd3
+#define BYD_PKT_THREE_FINGER_SWIPE_LEFT 0xd4
+#define BYD_PKT_FOUR_FINGER_DOWN 0x33
+#define BYD_PKT_FOUR_FINGER_UP 0xcd
+#define BYD_PKT_REGION_SCROLL_RIGHT 0x35
+#define BYD_PKT_REGION_SCROLL_DOWN 0x36
+#define BYD_PKT_REGION_SCROLL_UP 0xca
+#define BYD_PKT_REGION_SCROLL_LEFT 0xcb
+#define BYD_PKT_RIGHT_CORNER_CLICK 0xd2
+#define BYD_PKT_LEFT_CORNER_CLICK 0x2e
+#define BYD_PKT_LEFT_AND_RIGHT_CORNER_CLICK 0x2f
+#define BYD_PKT_ONTO_PAD_SWIPE_RIGHT 0x37
+#define BYD_PKT_ONTO_PAD_SWIPE_DOWN 0x30
+#define BYD_PKT_ONTO_PAD_SWIPE_UP 0xd0
+#define BYD_PKT_ONTO_PAD_SWIPE_LEFT 0xc9
+
+struct byd_init_command_pair {
+ uint8_t command;
+ uint8_t value;
+};
+
+static const struct byd_init_command_pair init_commands[] = {
+ {BYD_CMD_SET_HANDEDNESS, 0x01},
+ {BYD_CMD_SET_PHYSICAL_BUTTONS, 0x04},
+ {BYD_CMD_SET_TAP, 0x02},
+ {BYD_CMD_SET_ONE_FINGER_SCROLL, 0x04},
+ {BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC, 0x04},
+ {BYD_CMD_SET_EDGE_MOTION, 0x01},
+ {BYD_CMD_SET_PALM_CHECK, 0x00},
+ {BYD_CMD_SET_MULTITOUCH, 0x02},
+ {BYD_CMD_SET_TWO_FINGER_SCROLL, 0x04},
+ {BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC, 0x04},
+ {BYD_CMD_SET_LEFT_EDGE_REGION, 0x00},
+ {BYD_CMD_SET_TOP_EDGE_REGION, 0x00},
+ {BYD_CMD_SET_RIGHT_EDGE_REGION, 0x0},
+ {BYD_CMD_SET_BOTTOM_EDGE_REGION, 0x00},
+ {BYD_CMD_SET_ABSOLUTE_MODE, 0x02},
+};
+
+struct byd_model_info {
+ char name[16];
+ char id[BYD_MODEL_ID_LEN];
+};
+
+static struct byd_model_info byd_model_data[] = {
+ { "BTP10463", { 0x03, 0x64 } }
+};
+
+struct byd_data {
+ struct timer_list timer;
+ int32_t abs_x;
+ int32_t abs_y;
+ uint32_t last_touch_time;
+ uint32_t button_left : 1;
+ uint32_t button_right : 1;
+ uint32_t touch : 1;
+};
+
+static void byd_report_input(struct psmouse *psmouse)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- unsigned char param[4];
+ struct byd_data *priv = (struct byd_data *)psmouse->private;
+ struct input_dev *dev = psmouse->dev;

- param[0] = 0x03;
- param[1] = 0x00;
- param[2] = 0x00;
- param[3] = 0x00;
+ input_report_abs(dev, ABS_X, priv->abs_x);
+ input_report_abs(dev, ABS_Y, priv->abs_y);
+ input_report_key(dev, BTN_LEFT, priv->button_left);
+ input_report_key(dev, BTN_RIGHT, priv->button_right);
+ input_report_key(dev, BTN_TOUCH, priv->touch);
+ input_report_key(dev, BTN_TOOL_FINGER, priv->touch);

- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES))
- return -1;
- if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
- return -1;
+ input_sync(dev);
+}

- if (param[1] != 0x03 || param[2] != 0x64)
- return -ENODEV;
+static void byd_clear_touch(unsigned long data)
+{
+ struct psmouse *psmouse = (struct psmouse *)data;
+ struct byd_data *priv = psmouse->private;

- psmouse_dbg(psmouse, "BYD touchpad detected\n");
+ serio_pause_rx(psmouse->ps2dev.serio);

- if (set_properties) {
- psmouse->vendor = "BYD";
- psmouse->name = "TouchPad";
- }
+ priv->touch = 0;
+ /*
+ * move cursor back to center of pad when we lose touch
+ * this specifically improves user experiencce when moving
+ * cursor with one finger, and pressing butoton with other
+ */
+ priv->abs_x = BYD_CONST_PAD_WIDTH / 2;
+ priv->abs_y = BYD_CONST_PAD_HEIGHT / 2;

- return 0;
+ byd_report_input(psmouse);
+
+ serio_continue_rx(psmouse->ps2dev.serio);
}

static psmouse_ret_t byd_process_byte(struct psmouse *psmouse)
{
- struct input_dev *dev = psmouse->dev;
- u8 *pkt = psmouse->packet;
+ struct byd_data *priv = psmouse->private;
+ unsigned char *packet = psmouse->packet;
+ uint32_t now_msecs = jiffies_to_msecs(jiffies);

- if (psmouse->pktcnt > 0 && !(pkt[0] & PS2_ALWAYS_1)) {
- psmouse_warn(psmouse, "Always_1 bit not 1. pkt[0] = %02x\n",
- pkt[0]);
- return PSMOUSE_BAD_DATA;
- }

if (psmouse->pktcnt < psmouse->pktsize)
return PSMOUSE_GOOD_DATA;

- /* Otherwise, a full packet has been received */
- switch (pkt[3]) {
- case 0: {
- /* Standard packet */
- /* Sign-extend if a sign bit is set. */
- unsigned int signx = pkt[0] & PS2_X_SIGN ? ~0xFF : 0;
- unsigned int signy = pkt[0] & PS2_Y_SIGN ? ~0xFF : 0;
- int dx = signx | (int) pkt[1];
- int dy = signy | (int) pkt[2];
-
- input_report_rel(psmouse->dev, REL_X, dx);
- input_report_rel(psmouse->dev, REL_Y, -dy);
-
- input_report_key(psmouse->dev, BTN_LEFT, pkt[0] & PS2_LEFT);
- input_report_key(psmouse->dev, BTN_RIGHT, pkt[0] & PS2_RIGHT);
- input_report_key(psmouse->dev, BTN_MIDDLE, pkt[0] & PS2_MIDDLE);
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "process: packet = %x %x %x %x\n",
+ packet[0], packet[1], packet[2], packet[3]);
+#endif
+
+ switch (packet[3]) {
+ case BYD_PKT_ABSOLUTE:
+ /* on first touch, use the absolute packet to determine our start
location */
+ if (priv->touch == 0) {
+ priv->abs_x = packet[1] * (BYD_CONST_PAD_WIDTH / 256);
+ priv->abs_y = (255 - packet[2]) * (BYD_CONST_PAD_HEIGHT / 256);
+
+ /* needed to detect tap */
+ if (now_msecs - priv->last_touch_time > 64) {
+ priv->touch = 1;
+ }
+ }
break;
- }
-
- case BYD_SCROLLDOWN:
- case BYD_2DOWN:
- input_report_rel(dev, REL_WHEEL, -1);
- break;
-
- case BYD_SCROLLUP:
- case BYD_2UP:
- input_report_rel(dev, REL_WHEEL, 1);
- break;
-
- case BYD_SCROLLLEFT:
- case BYD_2LEFT:
- input_report_rel(dev, REL_HWHEEL, -1);
+ case BYD_PKT_RELATIVE:
+ {
+ int32_t rel_x, rel_y;
+
+ /* same as regular PS/2 psmouse protocoal */
+ rel_x = packet[1] ? (int) packet[1] - (int) ((packet[0] << 4) &
0x100) : 0;
+ rel_y = packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int)
packet[2] : 0;
+
+ /*
+ * experiments show relative mouse packets come in increments of
+ * 1 unit / 11 msecs (regardless of time delta between relative packets)
+ */
+ priv->abs_x += rel_x * 11;
+ priv->abs_y += rel_y * 11;
+
+ priv->touch = 1;
+ }
break;
+ default:
+ /* shoudn't be sending anything else, but ignore just in-case */
+ return PSMOUSE_FULL_PACKET;
+ }

- case BYD_SCROLLRIGHT:
- case BYD_2RIGHT:
- input_report_rel(dev, REL_HWHEEL, 1);
- break;
+ /* both ABS and REL packets report button states */
+ priv->button_left = packet[0] & 1;
+ priv->button_right = (packet[0] >> 1) & 1;

- case BYD_ZOOMOUT:
- case BYD_ZOOMIN:
- case BYD_3UP:
- case BYD_3DOWN:
- case BYD_3LEFT:
- case BYD_3RIGHT:
- case BYD_4UP:
- case BYD_4DOWN:
- break;
+ byd_report_input(psmouse);

- default:
- psmouse_warn(psmouse,
- "Unrecognized Z: pkt = %02x %02x %02x %02x\n",
- psmouse->packet[0], psmouse->packet[1],
- psmouse->packet[2], psmouse->packet[3]);
- return PSMOUSE_BAD_DATA;
+ /* reset time since last touch */
+ if (priv->touch == 1) {
+ priv->last_touch_time = now_msecs;
+ mod_timer(&priv->timer, jiffies + msecs_to_jiffies(64));
}

- input_sync(dev);
-
return PSMOUSE_FULL_PACKET;
}

-/* Send a sequence of bytes, where each is ACKed before the next is
sent. */
-static int byd_send_sequence(struct psmouse *psmouse, const u8 *seq,
size_t len)
+int byd_init(struct psmouse *psmouse)
{
- unsigned int i;
+ struct byd_data *priv;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[4];
+ int cmd, error = 0;
+ int i = 0;
+
+ /* it needs to be initialised like an intellimouse to get 4-byte
packets */
+ psmouse_reset(psmouse);
+ param[0] = 200;
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
+ param[0] = 100;
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
+ param[0] = 80;
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE);
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETID);
+
+ if (param[0] != 3)
+ return -1;
+
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: init sequence\n");
+#endif

- for (i = 0; i < len; ++i) {
- if (ps2_command(&psmouse->ps2dev, NULL, seq[i]))
- return -1;
+ /* activate the mouse to initialise it */
+ psmouse_activate(psmouse);
+
+ /* enter command mode */
+ param[0] = 0x00;
+ if (ps2_command(ps2dev, param, BYD_CMD_PAIR(0xe2))) {
+ error = -EIO;
+ goto init_fail;
+ }
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: entered command mode\n");
+#endif
+
+ /* send second identification command */
+ param[0] = 0x02;
+ if (ps2_command(ps2dev, param, BYD_CMD_PAIR(0xe0))) {
+ error = -EIO;
+ goto init_fail;
}
- return 0;
-}

-/* Keep scrolling after fingers are removed. */
-#define SCROLL_INERTIAL 0x01
-#define SCROLL_NO_INERTIAL 0x02
+ param[0] = 0x01;
+ if (ps2_command(ps2dev, param, BYD_CMD_PAIR_R(4, 0xe0))) {
+ error = -EIO;
+ goto init_fail;
+ }

-/* Clicking can be done by tapping or pressing. */
-#define CLICK_BOTH 0x01
-/* Clicking can only be done by pressing. */
-#define CLICK_PRESS_ONLY 0x02
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: magic %x %x %x %x\n",
+ param[0], param[1], param[2], param[3]);
+#endif
+
+ /* magic identifier the vendor driver reads */
+ if (param[0] != 0x08 || param[1] != 0x01 ||
+ param[2] != 0x01 || param[3] != 0x31) {
+#ifdef BYD_DEBUG
+ psmouse_err(psmouse, "unknown magic, expected: 08 01 01 31\n");
+#endif
+ error = -EINVAL;
+ goto init_fail;
+ }

-static int byd_enable(struct psmouse *psmouse)
-{
- const u8 seq1[] = { 0xE2, 0x00, 0xE0, 0x02, 0xE0 };
- const u8 seq2[] = {
- 0xD3, 0x01,
- 0xD0, 0x00,
- 0xD0, 0x04,
- /* Whether clicking is done by tapping or pressing. */
- 0xD4, CLICK_PRESS_ONLY,
- 0xD5, 0x01,
- 0xD7, 0x03,
- /* Vertical and horizontal one-finger scroll zone inertia. */
- 0xD8, SCROLL_INERTIAL,
- 0xDA, 0x05,
- 0xDB, 0x02,
- 0xE4, 0x05,
- 0xD6, 0x01,
- 0xDE, 0x04,
- 0xE3, 0x01,
- 0xCF, 0x00,
- 0xD2, 0x03,
- /* Vertical and horizontal two-finger scrolling inertia. */
- 0xE5, SCROLL_INERTIAL,
- 0xD9, 0x02,
- 0xD9, 0x07,
- 0xDC, 0x03,
- 0xDD, 0x03,
- 0xDF, 0x03,
- 0xE1, 0x03,
- 0xD1, 0x00,
- 0xCE, 0x00,
- 0xCC, 0x00,
- 0xE0, 0x00,
- 0xE2, 0x01
- };
- u8 param[4];
-
- if (byd_send_sequence(psmouse, seq1, ARRAY_SIZE(seq1)))
- return -1;
+ /*
+ * send the byd vendor commands
+ * these appear to be pairs of (command, param)
+ */
+ for (i = 0; i < ARRAY_SIZE(init_commands); i++) {
+ param[0] = init_commands[i].value;
+ cmd = BYD_CMD_PAIR(init_commands[i].command);
+ if (ps2_command(ps2dev, param, cmd)) {
+ error = -EIO;
+ goto init_fail;
+ }
+ }

- /* Send a 0x01 command, which should return 4 bytes. */
- if (ps2_command(&psmouse->ps2dev, param, 0x0401))
- return -1;
+ /* confirm/finalize the above vender command table */
+ param[0] = 0x00;
+ if (ps2_command(ps2dev, param, BYD_CMD_PAIR(0xe0))) {
+ error = -EIO;
+ goto init_fail;
+ }

- if (byd_send_sequence(psmouse, seq2, ARRAY_SIZE(seq2)))
- return -1;
+ /* exit command mode */
+ param[0] = 0x01;
+ if (ps2_command(ps2dev, param, BYD_CMD_PAIR(0xe2))) {
+ error = -ENOMEM;
+ goto init_fail;
+ }
+
+ /* alloc space for byd_data */
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv) {
+ error = -ENOMEM;
+ goto init_fail;
+ }
+
+ /* init struct and timer */
+ memset(priv, 0x00, sizeof(*priv));
+ /* signal touch end after not receiving movement packets for 32 ms */
+ setup_timer(&priv->timer, byd_clear_touch, (unsigned long)psmouse);
+ psmouse->private = priv;
+
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: exit command mode\n");
+#endif

return 0;
+
+init_fail:
+ psmouse_deactivate(psmouse);
+ return error;
}

-/*
- * Send the set of PS/2 commands required to make it identify as an
- * intellimouse with 4-byte instead of 3-byte packets.
- */
-static int byd_send_intellimouse_sequence(struct psmouse *psmouse)
+static void byd_disconnect(struct psmouse *psmouse)
{
- struct ps2dev *ps2dev = &psmouse->ps2dev;
- u8 param[4];
- int i;
- const struct {
- u16 command;
- u8 arg;
- } seq[] = {
- { PSMOUSE_CMD_RESET_BAT, 0 },
- { PSMOUSE_CMD_RESET_BAT, 0 },
- { PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_SETSCALE11, 0 },
- { PSMOUSE_CMD_GETINFO, 0 },
- { PSMOUSE_CMD_SETRES, 0x03 },
- { PSMOUSE_CMD_SETRATE, 0xC8 },
- { PSMOUSE_CMD_SETRATE, 0x64 },
- { PSMOUSE_CMD_SETRATE, 0x50 },
- { PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETRATE, 0xC8 },
- { PSMOUSE_CMD_SETRATE, 0xC8 },
- { PSMOUSE_CMD_SETRATE, 0x50 },
- { PSMOUSE_CMD_GETID, 0 },
- { PSMOUSE_CMD_SETRATE, 0x64 },
- { PSMOUSE_CMD_SETRES, 0x03 },
- { PSMOUSE_CMD_ENABLE, 0 }
- };
-
- memset(param, 0, sizeof(param));
- for (i = 0; i < ARRAY_SIZE(seq); ++i) {
- param[0] = seq[i].arg;
- if (ps2_command(ps2dev, param, seq[i].command))
- return -1;
- }
+ if (psmouse->private) {
+ struct byd_data *priv = psmouse->private;

- return 0;
+ del_timer(&priv->timer);
+ kfree(psmouse->private);
+ psmouse->private = NULL;
+ }
}

-static int byd_reset_touchpad(struct psmouse *psmouse)
+static int byd_reconnect(struct psmouse *psmouse)
{
- if (byd_send_intellimouse_sequence(psmouse))
- return -EIO;
+ if (byd_detect(psmouse, 0)) {
+ return -1;
+ }

- if (byd_enable(psmouse))
- return -EIO;
+ if (byd_init(psmouse)) {
+ return -1;
+ }

return 0;
}

-static int byd_reconnect(struct psmouse *psmouse)
+int byd_detect(struct psmouse *psmouse, bool set_properties)
{
- int retry = 0, error = 0;
+ struct ps2dev *ps2dev = &psmouse->ps2dev;
+ unsigned char param[4];
+ int i;

- psmouse_dbg(psmouse, "Reconnect\n");
- do {
- psmouse_reset(psmouse);
- if (retry)
- ssleep(1);
- error = byd_detect(psmouse, 0);
- } while (error && ++retry < 3);
+ /* reset the mouse */
+ psmouse_reset(psmouse);

- if (error)
- return error;
+ /* magic knock - identify the mouse (as per. the datasheet) */
+ param[0] = 0x03;
+ if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
+ ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+ return -EIO;
+ }

- psmouse_dbg(psmouse, "Reconnected after %d attempts\n", retry);
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: model id: %x %x %x\n",
+ param[0], param[1], param[2]);
+#endif
+
+ /*
+ * match the device - the first byte, param[0], appears to be set
+ * to some unknown value based on the state of the mouse and cannot
+ * be used for identification after suspend.
+ */
+ for (i = 0; i < ARRAY_SIZE(byd_model_data); i++) {
+ if (!memcmp(param + 1, &byd_model_data[i].id, BYD_MODEL_ID_LEN)) {
+ break;
+ }
+ }

- error = byd_reset_touchpad(psmouse);
- if (error) {
- psmouse_err(psmouse, "Unable to initialize device\n");
- return error;
+ /* no match found */
+ if (i == ARRAY_SIZE(byd_model_data)) {
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: no match found\n");
+#endif
+ return -EINVAL;
+ } else {
+#ifdef BYD_DEBUG
+ psmouse_dbg(psmouse, "detect: matched %s\n",
+ byd_model_data[i].name);
+#endif
}

- return 0;
-}
+ if (set_properties) {
+ struct input_dev *dev = psmouse->dev;

-int byd_init(struct psmouse *psmouse)
-{
- struct input_dev *dev = psmouse->dev;
+ __set_bit(INPUT_PROP_POINTER, dev->propbit);

- if (psmouse_reset(psmouse))
- return -EIO;
+ /* touchpad */
+ __set_bit(BTN_TOUCH, dev->keybit);
+ __set_bit(BTN_TOOL_FINGER, dev->keybit);

- if (byd_reset_touchpad(psmouse))
- return -EIO;
+ /* buttons */
+ __set_bit(BTN_LEFT, dev->keybit);
+ __set_bit(BTN_RIGHT, dev->keybit);
+ __clear_bit(BTN_MIDDLE, dev->keybit);
+
+ /* absolute position */
+ __set_bit(EV_ABS, dev->evbit);

- psmouse->reconnect = byd_reconnect;
- psmouse->protocol_handler = byd_process_byte;
- psmouse->pktsize = 4;
- psmouse->resync_time = 0;
+ input_set_abs_params(dev, ABS_X, 0, BYD_CONST_PAD_WIDTH, 0, 0);
+ input_set_abs_params(dev, ABS_Y, 0, BYD_CONST_PAD_HEIGHT, 0, 0);
+ input_abs_set_res(dev, ABS_X, BYD_CONST_PAD_RESOLUTION);
+ input_abs_set_res(dev, ABS_Y, BYD_CONST_PAD_RESOLUTION);

- __set_bit(BTN_MIDDLE, dev->keybit);
- __set_bit(REL_WHEEL, dev->relbit);
- __set_bit(REL_HWHEEL, dev->relbit);
+ /* no relative support */
+ __clear_bit(EV_REL, dev->evbit);
+ __clear_bit(REL_X, dev->relbit);
+ __clear_bit(REL_Y, dev->relbit);
+
+ psmouse->vendor = "BYD";
+ psmouse->name = "TouchPad";
+ psmouse->protocol_handler = byd_process_byte;
+ psmouse->pktsize = 4;
+ psmouse->private = NULL;
+ psmouse->disconnect = byd_disconnect;
+ psmouse->reconnect = byd_reconnect;
+ }

return 0;
}
diff --git a/drivers/input/mouse/byd.h b/drivers/input/mouse/byd.h
index d6c120c..86b4a0e 100644
--- a/drivers/input/mouse/byd.h
+++ b/drivers/input/mouse/byd.h
@@ -1,11 +1,25 @@
-#ifndef _BYD_H
-#define _BYD_H
+/*
+ * BYD BTP-10463 touchpad PS/2 mouse driver
+ *
+ * Copyright (C) 2015, Tai Chi Minh Ralph Eastwood
+ * Copyright (C) 2015, Martin Wimpress
+ * Copyright (C) 2015, Jay Kuri
+ * Copyright (C) 2016, Richard Pospesel
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as
published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __BYD_H
+#define __BYD_H

#ifdef CONFIG_MOUSE_PS2_BYD
int byd_detect(struct psmouse *psmouse, bool set_properties);
int byd_init(struct psmouse *psmouse);
#else
-static inline int byd_detect(struct psmouse *psmouse, bool set_properties)
+static inline int byd_detect(struct psmouse *psmouse,
+ bool set_properties)
{
return -ENOSYS;
}
@@ -13,6 +27,7 @@ static inline int byd_init(struct psmouse *psmouse)
{
return -ENOSYS;
}
+
#endif /* CONFIG_MOUSE_PS2_BYD */

-#endif /* _BYD_H */
+#endif /* __BYD_H */
diff --git a/drivers/input/mouse/psmouse-base.c
b/drivers/input/mouse/psmouse-base.c
index 39d1bec..5784e20 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -846,7 +846,7 @@ static const struct psmouse_protocol
psmouse_protocols[] = {
#ifdef CONFIG_MOUSE_PS2_BYD
{
.type = PSMOUSE_BYD,
- .name = "BydPS/2",
+ .name = "BYDPS/2",
.alias = "byd",
.detect = byd_detect,
.init = byd_init,

On 02/02/2016 05:46 PM, Richard Pospesel wrote:
> Hi Chris,
>
> Reporting absolute position allows the synaptics and libinput xorg
> drivers to treat the BYD touchpad as a touchpad, rather than a mouse.
> This allows edge scrolling, tap to click, natural scrolling and any
> other location based single touch gesture to work.
>
> I opted to completely disable the hardware multitouch gesture
> recognition (including two finger scroll) for a couple of reasons:
>
> 1. time delta between gesture packets was very large resulting in a
> rather jerky scrolling experience, especially compared to touchpad with
> real multitouch reporting.
> 2. Reporting absolute position and touch support enables the users to
> configure the touchpad in the touchpad settings section of gnome,
> cinnamon, etc because those applets configure synaptics and libinput.
> Otherwise xorg thinks it's just a mouse.
> 3. Enabling multitouch gesture recognition results in the mouse cursor
> freezing up when the user uses two fingers, one to move the mouse cursor
> and another to click. This is because movement packets stop getting
> sent while a gesture (such as pinch, rotate, etc) is being detected
> and/or reported. Disabling all hardware gesture detection, including
> two finger scroll, provides the most fluid user experience.
>
> Regarding serio_pause_rx(), I was following a pattern similar to another
> touchpad driver in psmouse. That whole callback mechanism is required
> to report the touch had ended, since the BYD hardware only sends packets
> when a touch is occurring. Is there a better way?
>
> I'll try to rebase and post an updated patch tonight.
>
> best,
> Richard
>
> On Feb 2, 2016 4:41 PM, "Chris Diamand" <chris@diamand.org
> <mailto:chris@diamand.org>> wrote:
> >
> > Hi Richard,
> >
> > > This adds proper single-touch support for BYD touchpads to the
> psmouse input
> > > driver.
> >
> > I posted a driver for the same touchpad a few weeks ago, which has
> been merged
> > into linux-next. There's some stuff in this patch which is missing in
> my driver
> > though, so we should definitely try and include that, and I'm very
> curious
> > about the pseudo-absolute mode.
> >
> > > This patch is against commit
> b82dde0230439215b55e545880e90337ee16f51a (Merge tag
> > > 'please-pull-copy_file_range' of
> > > git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux
> <http://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux> ) of Linus'
> kernel
> > > branch.
> >
> > Can you rebase against
> > 'git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> <http://git.kernel.org/pub/scm/linux/kernel/git/dtor/input>'?
> >
> > > +/* BYD commands reverse engineered from windows driver */
> > > +
> > > +/*
> > > + * swipe gesture from off-pad to on-pad
> > > + * 0 : disable
> > > + * 1 : enable
> > > + */
> > > +#define BYD_CMD_SET_OFFSCREEN_SWIPE 0xcc
> > > +/*
> > > + * tap and drag delay time
> > > + * 0 : disable
> > > + * 1 - 8 : least to most delay
> > > + */
> > > +#define BYD_CMD_SET_TAP_DRAG_DELAY_TIME 0xcf
> > > +/*
> > > + * physical buttons function mapping
> > > + * 0 : enable
> > > + * 4 : normal
> > > + * 5 : left button custom command
> > > + * 6 : right button custom command
> > > + * 8 : disable
> > > + */
> > > +#define BYD_CMD_SET_PHYSICAL_BUTTONS 0xd0
> > > +/*
> > > + * absolute mode (1 byte X/Y resolution)
> > > + * 0 : disable
> > > + * 2 : enable
> > > + */
> > > +#define BYD_CMD_SET_ABSOLUTE_MODE 0xd1
> > > +/*
> > > + * two finger scrolling
> > > + * 1 : vertical
> > > + * 2 : horizontal
> > > + * 3 : vertical + horizontal
> > > + * 4 : disable
> > > + */
> > > +#define BYD_CMD_SET_TWO_FINGER_SCROLL 0xd2
> > > +/*
> > > + * handedness
> > > + * 1 : right handed
> > > + * 2 : left handed
> > > + */
> > > +#define BYD_CMD_SET_HANDEDNESS 0xd3
> > > +/*
> > > + * tap to click
> > > + * 1 : enable
> > > + * 2 : disable
> > > + */
> > > +#define BYD_CMD_SET_TAP 0xd4
> > > +/*
> > > + * tap and drag
> > > + * 1 : tap and hold to drag
> > > + * 2 : tap and hold to drag + lock
> > > + * 3 : disable
> > > + */
> > > +#define BYD_CMD_SET_TAP_DRAG 0xd5
> > > +/*
> > > + * touch sensitivity
> > > + * 1 - 7 : least to most sensitive
> > > + */
> > > +#define BYD_CMD_SET_TOUCH_SENSITIVITY 0xd6
> > > +/*
> > > + * one finger scrolling
> > > + * 1 : vertical
> > > + * 2 : horizontal
> > > + * 3 : vertical + horizontal
> > > + * 4 : disable
> > > + */
> > > +#define BYD_CMD_SET_ONE_FINGER_SCROLL 0xd7
> > > +/*
> > > + * one finger scrolling function
> > > + * 1 : free scrolling
> > > + * 2 : edge motion
> > > + * 3 : free scrolling + edge motion
> > > + * 4 : disable
> > > + */
> > > +#define BYD_CMD_SET_ONE_FINGER_SCROLL_FUNC 0xd8
> > > +/*
> > > + * sliding speed
> > > + * 1 - 5 : slowest to fastest
> > > + */
> > > +#define BYD_CMD_SET_SLIDING_SPEED 0xda
> > > +/*
> > > + * edge motion
> > > + * 1 : disable
> > > + * 2 : enable when dragging
> > > + * 3 : enable when dragging and pointing
> > > + */
> > > +#define BYD_CMD_SET_EDGE_MOTION 0xdb
> > > +/*
> > > + * left edge region size
> > > + * 0 - 7 : smallest to largest width
> > > + */
> > > +#define BYD_CMD_SET_LEFT_EDGE_REGION 0xdc
> > > +/*
> > > + * top edge region size
> > > + * 0 - 9 : smallest to largest height
> > > + */
> > > +#define BYD_CMD_SET_TOP_EDGE_REGION 0xdd
> > > +/*
> > > + * disregard palm press as clicks
> > > + * 1 - 6 : smallest to largest
> > > + */
> > > +#define BYD_CMD_SET_PALM_CHECK 0xde
> > > +/* right edge region size
> > > + * 0 - 7 : smallest to largest width
> > > + */
> > > +#define BYD_CMD_SET_RIGHT_EDGE_REGION 0xdf
> > > +/*
> > > + * bottom edge region size
> > > + * 0 - 9 : smallest to largest height
> > > + */
> > > +#define BYD_CMD_SET_BOTTOM_EDGE_REGION 0xe1
> > > +/*
> > > + * multitouch gestures
> > > + * 1 : enable
> > > + * 2 : disable
> > > + */
> > > +#define BYD_CMD_SET_MULTITOUCH 0xe3
> > > +/*
> > > + * edge motion speed
> > > + * 0 : control with finger pressure
> > > + * 1 - 9 : slowest to fastest
> > > + */
> > > +#define BYD_CMD_SET_EDGE_MOTION_SPEED 0xe4
> > > +/*
> > > + * two finger scolling function
> > > + * 0 : free scrolling
> > > + * 1 : free scrolling (with momentum)
> > > + * 2 : edge motion
> > > + * 3 : free scrolling (with momentum) + edge motion
> > > + * 4 : disable
> > > + */
> > > +#define BYD_CMD_SET_TWO_FINGER_SCROLL_FUNC 0xe5
> >
> > These are definitely worth merging into the existing driver - I never
> got the
> > time to figure out all of the different settings.
> >
> > > +
> > > +struct byd_data {
> > > + struct timer_list timer;
> > > + int32_t abs_x;
> > > + int32_t abs_y;
> > > + uint32_t last_touch_time;
> > > + uint32_t button_left : 1;
> > > + uint32_t button_right : 1;
> > > + uint32_t touch : 1;
> > > +};
> > > +
> >
> > It looks like whatever email client you used has broken the
> formatting - when
> > you resend, can you use something which will preserve whitespace
> properly? See
> > 'Documentation/email-clients.txt'.
> >
> > > +static void byd_report_input(struct psmouse *psmouse)
> > > +{
> > > + struct byd_data *priv = (struct byd_data *)psmouse->private;
> > > + struct input_dev *dev = psmouse->dev;
> > > +
> > > + input_report_abs(dev, ABS_X, priv->abs_x);
> > > + input_report_abs(dev, ABS_Y, priv->abs_y);
> > > + input_report_key(dev, BTN_LEFT, priv->button_left);
> > > + input_report_key(dev, BTN_RIGHT, priv->button_right);
> > > + input_report_key(dev, BTN_TOUCH, priv->touch);
> > > + input_report_key(dev, BTN_TOOL_FINGER, priv->touch);
> > > +
> > > + input_sync(dev);
> > > +}
> >
> > Could you explain generally why you're reporting in absolute mode? What
> > advantage does it have over using relative reporting and turning off the
> > absolute packets in the touchpad init sequence?
> >
> > > +
> > > +static void byd_clear_touch(unsigned long data)
> > > +{
> > > + struct psmouse *psmouse = (struct psmouse *)data;
> > > + struct byd_data *priv = psmouse->private;
> > > +
> > > + serio_pause_rx(psmouse->ps2dev.serio);
> > > +
> > > + priv->touch = 0;
> > > + /*
> > > + * move cursor back to center of pad when we lose touch
> > > + * this specifically improves user experiencce when moving
> > > + * cursor with one finger, and pressing butoton with other
> > > + */
> > > + priv->abs_x = BYD_CONST_PAD_WIDTH / 2;
> > > + priv->abs_y = BYD_CONST_PAD_HEIGHT / 2;
> > > +
> > > + byd_report_input(psmouse);
> >
> > serio_pause_rx() takes a spinlock - might be worth checking that
> > byd_report_input() doesn't do anything that might sleep.
> >
> > > + switch (packet[3]) {
> > > + case BYD_PKT_ABSOLUTE:
> > > + /* on first touch, use the absolute packet to determine our start
> location */
> > > + if (priv->touch == 0) {
> > > + priv->abs_x = packet[1] * (BYD_CONST_PAD_WIDTH / 256);
> > > + priv->abs_y = (255 - packet[2]) * (BYD_CONST_PAD_HEIGHT / 256);
> > > +
> > > + /* needed to detect tap */
> > > + if (now_msecs - priv->last_touch_time > 64) {
> > > + priv->touch = 1;
> > > + }
> > > + }
> > > + break;
> > > + case BYD_PKT_RELATIVE:
> > > + {
> > > + int32_t rel_x, rel_y;
> > > +
> > > + /* same as regular PS/2 psmouse protocoal */
> > > + rel_x = packet[1] ? (int) packet[1] - (int) ((packet[0] << 4) &
> 0x100) : 0;
> > > + rel_y = packet[2] ? (int) ((packet[0] << 3) & 0x100) - (int)
> packet[2] : 0;
> > > +
> > > + /*
> > > + * experiments show relative mouse packets come in increments of
> > > + * 1 unit / 11 msecs (regardless of time delta between relative
> packets)
> > > + */
> > > + priv->abs_x += rel_x * 11;
> > > + priv->abs_y += rel_y * 11;
> > > +
> > > + priv->touch = 1;
> > > + }
> >
> > So can this not handle gestures/multitouch?
> >
> > Cheers!
> > Chris
>

\
 
 \ /
  Last update: 2016-02-03 07:21    [W:0.143 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site