lkml.org 
[lkml]   [2016]   [Feb]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/5] pwms: pwm-ti*: Remove support for local clock gating
* Franklin S Cooper Jr <fcooper@ti.com> [160225 14:37]:
> The PWMSS local clock gating registers have no real purpose on OMAP ARM
> devices. These registers were left over registers from DSP IP where the
> PRCM doesn't exist. There is a silicon bug where gating and ungating clocks
> don't function properly. TRMs will be update to indicate that these
> registers shouldn't be touched.
>
> Therefore, all code that accesses the PWMSS_CLKCONFIG or PWMSS_CLKSTATUS
> will be removed by this patch with zero loss of functionality by the ECAP
> and EPWM drivers.
> @@ -243,40 +240,15 @@ static int ecap_pwm_probe(struct platform_device *pdev)
> }
>
> pm_runtime_enable(&pdev->dev);
> - pm_runtime_get_sync(&pdev->dev);
> -
> - status = pwmss_submodule_state_change(pdev->dev.parent,
> - PWMSS_ECAPCLK_EN);
> - if (!(status & PWMSS_ECAPCLK_EN_ACK)) {
> - dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
> - ret = -EINVAL;
> - goto pwmss_clk_failure;
> - }
> -
> - pm_runtime_put_sync(&pdev->dev);
>
> platform_set_drvdata(pdev, pc);
> return 0;
> -
> -pwmss_clk_failure:
> - pm_runtime_put_sync(&pdev->dev);
> - pm_runtime_disable(&pdev->dev);
> - pwmchip_remove(&pc->chip);
> - return ret;
> }

Hmm but why are you also removing the pm_runtime calls? Those
actually do take care of gating the clocks via the interconnect
level code that is hwmod in this case.

Regards,

Tony

\
 
 \ /
  Last update: 2016-02-29 23:41    [W:1.124 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site