lkml.org 
[lkml]   [2016]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC 3/3] iommu: dma-iommu: use common implementation also on ARM architecture
From
Date
Hello,

On 2016-02-19 11:30, Arnd Bergmann wrote:
> On Friday 19 February 2016 09:22:44 Marek Szyprowski wrote:
>> This patch replaces ARM-specific IOMMU-based DMA-mapping implementation
>> with generic IOMMU DMA-mapping code shared with ARM64 architecture. The
>> side-effect of this change is a switch from bitmap-based IO address space
>> management to tree-based code. There should be no functional changes
>> for drivers, which rely on initialization from generic arch_setup_dna_ops()
>> interface. Code, which used old arm_iommu_* functions must be updated to
>> new interface.
>>
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> I like the overall idea. However, this interface from the iommu
> subsystem into architecture specific code:
>
>> +/*
>> + * The DMA API is built upon the notion of "buffer ownership". A buffer
>> + * is either exclusively owned by the CPU (and therefore may be accessed
>> + * by it) or exclusively owned by the DMA device. These helper functions
>> + * represent the transitions between these two ownership states.
>> + *
>> + * Note, however, that on later ARMs, this notion does not work due to
>> + * speculative prefetches. We model our approach on the assumption that
>> + * the CPU does do speculative prefetches, which means we clean caches
>> + * before transfers and delay cache invalidation until transfer completion.
>> + *
>> + */
>> +extern void __dma_page_cpu_to_dev(struct page *, unsigned long, size_t,
>> + enum dma_data_direction);
>> +extern void __dma_page_dev_to_cpu(struct page *, unsigned long, size_t,
>> + enum dma_data_direction);
>> +
>> +static inline void arch_flush_page(struct device *dev, const void *virt,
>> + phys_addr_t phys)
>> +{
>> + dmac_flush_range(virt, virt + PAGE_SIZE);
>> + outer_flush_range(phys, phys + PAGE_SIZE);
>> +}
>> +
>> +static inline void arch_dma_map_area(phys_addr_t phys, size_t size,
>> + enum dma_data_direction dir)
>> +{
>> + unsigned int offset = phys & ~PAGE_MASK;
>> + __dma_page_cpu_to_dev(phys_to_page(phys & PAGE_MASK), offset, size, dir);
>> +}
>> +
>> +static inline void arch_dma_unmap_area(phys_addr_t phys, size_t size,
>> + enum dma_data_direction dir)
>> +{
>> + unsigned int offset = phys & ~PAGE_MASK;
>> + __dma_page_dev_to_cpu(phys_to_page(phys & PAGE_MASK), offset, size, dir);
>> +}
>> +
>> +static inline pgprot_t arch_get_dma_pgprot(struct dma_attrs *attrs,
>> + pgprot_t prot, bool coherent)
>> +{
>> + if (coherent)
>> + return prot;
>> +
>> + prot = dma_get_attr(DMA_ATTR_WRITE_COMBINE, attrs) ?
>> + pgprot_writecombine(prot) :
>> + pgprot_dmacoherent(prot);
>> + return prot;
>> +}
>> +
>> +extern void *arch_alloc_from_atomic_pool(size_t size, struct page **ret_page,
>> + gfp_t flags);
>> +extern bool arch_in_atomic_pool(void *start, size_t size);
>> +extern int arch_free_from_atomic_pool(void *start, size_t size);
>> +
>> +
> doesn't feel completely right yet. In particular the arch_flush_page()
> interface is probably still too specific to ARM/ARM64 and won't work
> that way on other architectures.
>
> I think it would be better to do this either more generic, or less generic:
>
> a) leave the iommu_dma_map_ops definition in the architecture specific
> code, but make it call helper functions in the drivers/iommu to do all
> of the really generic parts.
>
> b) clarify that this is only applicable to arch/arm and arch/arm64, and
> unify things further between these two, as they have very similar
> requirements in the CPU architecture.

Some really generic parts are already in iommu/dma-iommu.c and one can build
it's own, non-ARM CPU architecture based IOMMU/DMA-mapping code. Initially I
also wanted to use that generic code on both ARM and ARM64, but it
turned out
that both archs, ARM and ARM64 will duplicate 99% of code, which use this
'generic' functions. This was the reason why I dedided to move all that
common code from arch/{arm,arm64}/mm/dma-mapping.c to
drivers/iommu/dma-iommu-ops.c

I'm not sure if I can design all the changes that need to be made to
drivers/iommu/dma-iommu-ops.c to make it more generic. Maybe when one will
try to use that code with other, non-ARM architecture based arch glue code,
a better abstraction can be developed. For now I would like to keep all this
code in a common place so both arm and arm64 will benefit from improvements
done there.

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2016-02-25 14:01    [W:0.098 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site