lkml.org 
[lkml]   [2016]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] arm64: dts: Add tmu node for exynos7
From
Date
On 25.02.2016 12:27, Pankaj Dubey wrote:
> From: Alim Akhtar <alim.akhtar@samsung.com>
>
> This patch adds tmu node, related temprature sensor and triping
> point data for Atlas cpu core found on exynos7 SoC.
>
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>

Yours Sob is missing.

Cc-ed Lukasz Majewski.

Lukasz,
Your review or ack would be appreciated.


> ---
> .../boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi | 25 +++++++++
> .../arm64/boot/dts/exynos/exynos7-trip-points.dtsi | 55 ++++++++++++++++++++
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 20 +++++++
> 3 files changed, 100 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> create mode 100644 arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> new file mode 100644
> index 0000000..1d6dcf2
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi
> @@ -0,0 +1,25 @@
> +/*
> + * Device tree sources for Exynos7 TMU sensor configuration
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <dt-bindings/thermal/thermal_exynos.h>
> +
> +#thermal-sensor-cells = <0>;
> +samsung,tmu_gain = <9>;
> +samsung,tmu_reference_voltage = <17>;
> +samsung,tmu_noise_cancel_mode = <4>;
> +samsung,tmu_efuse_value = <75>;
> +samsung,tmu_min_efuse_value = <15>;
> +samsung,tmu_max_efuse_value = <100>;
> +samsung,tmu_first_point_trim = <25>;
> +samsung,tmu_second_point_trim = <85>;
> +samsung,tmu_default_temp_offset = <50>;
> +samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> new file mode 100644
> index 0000000..3970545
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos7-trip-points.dtsi
> @@ -0,0 +1,55 @@
> +/*
> + * Device tree sources for default Exynos7 thermal zone definition
> + *
> + * Copyright (c) 2016 Samsung Electronics Co., Ltd.
> + * http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +trips {
> + cpu-alert-0 {
> + temperature = <75000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-1 {
> + temperature = <80000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-2 {
> + temperature = <85000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-3 {
> + temperature = <90000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-4 {
> + temperature = <95000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-5 {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + cpu-alert-6 {
> + temperature = <110000>; /* millicelsius */
> + hysteresis = <10000>; /* millicelsius */
> + type = "passive";
> + };
> + /* HW Trip point */

The comment looks unnecessary, all of these are HW trip points, right?

> + cpu-crit-0 {
> + temperature = <115000>; /* millicelsius */
> + hysteresis = <0>; /* millicelsius */
> + type = "critical";
> + };
> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index c662f98..fc9d130 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -27,6 +27,7 @@
> pinctrl6 = &pinctrl_fsys0;
> pinctrl7 = &pinctrl_fsys1;
> pinctrl8 = &pinctrl_bus1;
> + tmuctrl0 = &tmuctrl_0;

Why the alias is needed?

> };
>
> cpus {
> @@ -538,6 +539,25 @@
> clocks = <&clock_peric0 PCLK_PWM>;
> clock-names = "timers";
> };
> +
> + tmuctrl_0: tmu@10060000 {
> + compatible = "samsung,exynos7-tmu";
> + reg = <0x10060000 0x200>;
> + interrupts = <0 108 0>;
> + clocks = <&clock_peris PCLK_TMU>,
> + <&clock_peris SCLK_TMU>;
> + clock-names = "tmu_apbif", "tmu_sclk";
> + #include "exynos7-tmu-sensor-conf.dtsi"
> + };
> +
> + thermal-zones {
> + atlas_thermal: atlas-thermal {

The atlas is a Exynos7 specific codename. The name of node should be a
general class of the device, so maybe:
atlas_thermal: cluster0-thermal
?

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2016-02-25 05:41    [W:0.052 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site