Messages in this thread | | | Date | Tue, 23 Feb 2016 16:54:38 -0600 | From | Rob Herring <> | Subject | Re: [PATCH v3 1/2] devicetree: Add UCS1002 USB Port Power Controller binding |
| |
On Tue, Feb 23, 2016 at 08:27:04AM +0100, Enric Balletbo i Serra wrote: > The UCS1002-2 provides a USB port power switch for precise control of up > to 2.5 amperes continuous current. > > You can add support to your board with current binding. > > Example: > > ucs1002: ucs1002@57 { > compatible = "microchip,ucs1002"; > reg = <0x57>; > }; > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > Changes since v2: > - Rename microchip,current-limit to microchip,limit-microamps (Rob Herring) > Changes since v1: > - Fix units, are microamps (Rob Herring) > - Remove microchip,pin-ignore as is implied by absence of gpio properties (Rob > Herring) > - Group control gpios instead of use separate gpios. All control gpios must be > set together (Enric Balletbo) > > .../devicetree/bindings/power/ucs1002.txt | 41 ++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/ucs1002.txt
Acked-by: Rob Herring <robh@kernel.org>
| |