lkml.org 
[lkml]   [2016]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] tty: n_gsm: Make mux work as a responder station
Date
When using n_gsm you have to explicitly set it to work as a initiator
station. This led me to believe that it can also work as a responder.

In a use case where I needed responder station mux I came to the
conclusion that it actually does not work. Second and third patch
fix dealings with frame C/R bit that then enable mux to work as a
responder station.

Next patches in the series then fix bugs that were found after two
instances of n_gsm connected over null-modem cable were used.

First patch fixes formatting errors, such as space before comma, and
most of the warnings reported by the checkpatch script.


Andrej Krpic (8):
tty: n_gsm: fix formatting errors
tty: n_gsm: fix C/R bit when sending as a responder
tty: n_gsm: make mux work as a responder station
tty: n_gsm: send DM response when accessing an invalid channel
tty: n_gsm: replace dead code with a meaningful comment
tty: n_gsm: add missing length field in control channel commands
tty: n_gsm: properly format Modem Status Command message
tty: n_gsm: Enable reception of frames separated with a single SOF
marker

drivers/tty/n_gsm.c | 191 +++++++++++++++++++++++++++++++++-------------------
1 file changed, 123 insertions(+), 68 deletions(-)

--
2.7.0

\
 
 \ /
  Last update: 2016-02-23 00:41    [W:0.087 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site