lkml.org 
[lkml]   [2016]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH 2/9] iio: imu: inv_mpu6050: Fix Yoda conditions
From
Date
On 19/02/16 09:09, Crt Mori wrote:
> This is quite trivial.
>
> Acked-by: Crt Mori <cmo@melexis.com>
Applied.
>
> On 18 February 2016 at 16:53, Daniel Baluta <daniel.baluta@intel.com> wrote:
>> This fixes the following checkpatch warning:
>> * WARNING: Comparisons should place the constant
>> on the right side of the test
>>
>> Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
>> ---
>> drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 6 +++---
>> drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 2 +-
>> 2 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>> index 84e014c..c550ebb 100644
>> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
>> @@ -84,7 +84,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
>> * clock source be switched to gyro. Otherwise, it must be set to
>> * internal clock
>> */
>> - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
>> + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
>> result = regmap_read(st->map, st->reg->pwr_mgmt_1, &mgmt_1);
>> if (result)
>> return result;
>> @@ -92,7 +92,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
>> mgmt_1 &= ~INV_MPU6050_BIT_CLK_MASK;
>> }
>>
>> - if ((INV_MPU6050_BIT_PWR_GYRO_STBY == mask) && (!en)) {
>> + if ((mask == INV_MPU6050_BIT_PWR_GYRO_STBY) && (!en)) {
>> /*
>> * turning off gyro requires switch to internal clock first.
>> * Then turn off gyro engine
>> @@ -117,7 +117,7 @@ int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, u32 mask)
>> if (en) {
>> /* Wait for output stabilize */
>> msleep(INV_MPU6050_TEMP_UP_TIME);
>> - if (INV_MPU6050_BIT_PWR_GYRO_STBY == mask) {
>> + if (mask == INV_MPU6050_BIT_PWR_GYRO_STBY) {
>> /* switch internal clock to PLL */
>> mgmt_1 |= INV_CLK_PLL;
>> result = regmap_write(st->map,
>> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
>> index 1fc5fd9..441080b 100644
>> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
>> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
>> @@ -168,7 +168,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
>>
>> result = kfifo_out(&st->timestamps, &timestamp, 1);
>> /* when there is no timestamp, put timestamp as 0 */
>> - if (0 == result)
>> + if (result == 0)
>> timestamp = 0;
>>
>> result = iio_push_to_buffers_with_timestamp(indio_dev, data,
>> --
>> 2.5.0
>>

\
 
 \ /
  Last update: 2016-02-21 22:01    [W:2.039 / U:0.952 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site