lkml.org 
[lkml]   [2016]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] serial: samsung: fix the inconsistency in spinlock
Hi Krzysztof,

On 19 February 2016 at 13:14, Krzysztof Kozlowski
<k.kozlowski@samsung.com> wrote:
> On 19.02.2016 15:51, Anand Moon wrote:
>> Hi Krzysztof,
>>
>> On 19 February 2016 at 11:39, Krzysztof Kozlowski
>> <k.kozlowski@samsung.com> wrote:
>>> 2016-02-19 4:14 GMT+09:00 Anand Moon <linux.amoon@gmail.com>:
>>>> Hi Peter,
>>>>
>>>> On 18 February 2016 at 23:18, Peter Hurley <peter@hurleysoftware.com> wrote:
>>>>> Hi Anand,
>>>>>
>>>>> On 02/18/2016 09:40 AM, Anand Moon wrote:
>>>>>> From: Anand Moon <linux.amoon@gmail.com>
>>>>>>
>>>>>> changes fix the correct order of the spin_lock_irqrestore/save.
>>>>>>
>>>>>> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
>>>>>> ---
>>>>>> drivers/tty/serial/samsung.c | 4 ++--
>>>>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>>>>
>>>>>> diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
>>>>>> index d72cd73..96fe14d 100644
>>>>>> --- a/drivers/tty/serial/samsung.c
>>>>>> +++ b/drivers/tty/serial/samsung.c
>>>>>> @@ -759,9 +759,9 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
>>>>>> }
>>>>>>
>>>>>> if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) {
>>>>>> - spin_unlock(&port->lock);
>>>>>> + spin_unlock_irqrestore(&port->lock, flags);
>>>>>> uart_write_wakeup(port);
>>>>>> - spin_lock(&port->lock);
>>>>>> + spin_lock_irqsave(&port->lock, flags);
>>>>>
>>>>> This driver shouldn't be dropping the spin lock at for write wakeup.
>>>>> If this is causing lock-ups in a line discipline, the line discipline
>>>>> needs fixed.
>>>>>
>>>>
>>>> Thanks for pointing out.
>>>> Their is no lock up, just the inconstancy of the spin_lock.
>>>> Then I will resend this patch dropping the spin_unlock/spin_lock
>>>> around uart_write_wakeup.
>>>> Is that ok with you.
>>>
>>> Anand, before doing that, can you check Peter's second sentence? I
>>> mean the "If this is causing lock-ups in a line discipline, the line
>>> discipline needs fixed.".
>>> Don't drop the spin-locks "just because". I would be happy to see more
>>> detailed explanation in changelog.
>>>
>>> Best regards,
>>> Krzysztof
>>
>> Yes I understood the meaning of the sentence. Already the
>> s3c24xx_serial_tx_chars function.
>> holds the lock port->lock for safe IRQ execution.
>
> I am sorry but I don't get your explanation. I mentioned Peter's
> thoughts about lockups after adding locking over uart_write(). However
> you are referring to s3c24xx_serial_tx_chars() holding the spin lock...
> I am missing the point...
>
> Best regards,
> Krzysztof
>

I should be sorry I could not explain you in technical terms.
Interrupt routine already hold the port->lock

s3c24xx_serial_tx_chars
\
spin_lock_irqsave(&port->lock, flags);
\...
spin_unlock(&port->lock);
uart_write_wakeup(port);
spin_lock(&port->lock);
\
spin_unlock_irqrestore(&port->lock, flags);

In my next patch I have tried to remove the spin_unlock/spin_lock over
uart_write_wakeup(port);

Best Regards.
-Anand Moon

\
 
 \ /
  Last update: 2016-02-19 09:41    [W:0.051 / U:1.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site