lkml.org 
[lkml]   [2016]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/2] usb: musb: Fix DMA desired mode for Mentor DMA engine
Date
From: Cristian Birsan <cristian.birsan@microchip.com>

Commit 754fe4a92c07 ("usb: musb: Remove ifdefs for TX DMA for musb_host.c")
introduces a problem setting the desired channel mode for the Mentor DMA
engine.

There is a case where an address is incorrectly assigned to the DMA
channel desired mode when it should instead be assigned the actual mode
value. This results in the value of channel->desired_mode not being
correct.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes since v3: None
Changes since v2:
- Fix wording in commit message.
Changes since v1:
- Fix commit comment citing the cause of the regression.
---
drivers/usb/musb/musb_host.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 75c89b4..58487a4 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -662,7 +662,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
}
- channel->desired_mode = mode;
+ channel->desired_mode = *mode;
musb_writew(epio, MUSB_TXCSR, csr);

return 0;
--
1.7.9.5
\
 
 \ /
  Last update: 2016-02-19 18:01    [W:0.028 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site