lkml.org 
[lkml]   [2016]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 3/3] ARM64: dts: mt8173: Add thermal/auxadc device nodes
From
Date
Hi Sascha,

On 30/11/15 12:42, Sascha Hauer wrote:
> This adds the thermal controller and auxadc nodes to the Mediatek MT8173
> dtsi file.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
> ---
> arch/arm64/boot/dts/mediatek/mt8173.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> index 06a1564..e2ddd03 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -277,6 +277,11 @@
> (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
> };
>
> + auxadc: auxadc@11001000 {
> + compatible = "mediatek,mt8173-auxadc";

Can you please write a small Documentation about the binding.
I suppose it will be mediatek,auxadc and mediatek,mt8173-auxadc.

I can't do it my self, as my datasheet lacks the auxadc registers.

Thanks,
Matthias

> + reg = <0 0x11001000 0 0x1000>;
> + };
> +
> uart0: serial@11002000 {
> compatible = "mediatek,mt8173-uart",
> "mediatek,mt6577-uart";
> @@ -487,6 +492,18 @@
> clock-names = "source", "hclk";
> status = "disabled";
> };
> +
> + thermal: thermal@1100b000 {
> + #thermal-sensor-cells = <0>;
> + compatible = "mediatek,mt8173-thermal";
> + reg = <0 0x1100b000 0 0x1000>;
> + interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
> + clock-names = "therm", "auxadc";
> + resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
> + mediatek,auxadc = <&auxadc>;
> + mediatek,apmixedsys = <&apmixedsys>;
> + };
> };
> };
>
>

\
 
 \ /
  Last update: 2016-02-18 17:41    [W:0.234 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site