lkml.org 
[lkml]   [2016]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/7] QE: Add IC, SI and SIRAM document to device tree bindings.
Date
Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
---
Changes for v2
- Add interrupt-controller in Required properties
- delete address-cells and size-cells for qe-si and qe-siram

.../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt | 50 ++++++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
index 4f89302..84052a7 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
@@ -69,6 +69,56 @@ Example:
};
};

+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+ qeic: interrupt-controller@80 {
+ interrupt-controller;
+ compatible = "fsl,qe-ic";
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x80 0x80>;
+ interrupts = <95 2 0 0 94 2 0 0>; //high:79 low:78
+ };
+
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,qe-si".
+- reg : Address range of SI register set.
+
+Example:
+
+ si1: si@700 {
+ compatible = "fsl,qe-si";
+ reg = <0x700 0x80>;
+ };
+
+* Serial Interface Block RAM(SIRAM)
+
+store the routing entries of SI
+
+Required properties:
+- compatible : should be "fsl,qe-siram".
+- reg : Address range of SI RAM.
+
+Example:
+
+ siram1: siram@1000 {
+ compatible = "fsl,qe-siram";
+ reg = <0x1000 0x800>;
+ };
+
* QE Firmware Node

This node defines a firmware binary that is embedded in the device tree, for
--
2.1.0.27.g96db324
\
 
 \ /
  Last update: 2016-02-18 02:41    [W:0.097 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site