lkml.org 
[lkml]   [2016]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 10/14] ARM: dts: sun8i-a83t: Add PRCM related clocks and resets
On Sat, Feb 13, 2016 at 12:43 AM, Chen-Yu Tsai <wens@csie.org> wrote:
> On Sat, Feb 13, 2016 at 12:06 AM, Vishnu Patekar
> <vishnupatekar0510@gmail.com> wrote:
>> Hello Wens,
>>
>>
>> On Tue, Feb 2, 2016 at 2:44 PM, Chen-Yu Tsai <wens@csie.org> wrote:
>>> On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar
>>> <vishnupatekar0510@gmail.com> wrote:
>>>> This adds A83T PRCM related clocks, clock resets.
>>>>
>>>> As a83t apb0 gates clock support is added earlier, this enables it.
>>>> Apart from apb0 gates, other added clocks are compatible with
>>>> earlier sun8i socs.
>>>>
>>>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
>>>> ---
>>>> arch/arm/boot/dts/sun8i-a83t.dtsi | 44 +++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 44 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
>>>> index ac96aa1..5ea20ff 100644
>>>> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
>>>> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
>>>> @@ -268,6 +268,44 @@
>>>> "mmc2_output",
>>>> "mmc2_sample";
>>>> };
>>>> +
>>>> + cpus_clk: clk@01f01400 {
>>>> + compatible = "allwinner,sun9i-a80-cpus-clk";
>>>> + reg = <0x01f01400 0x4>;
>>>> + #clock-cells = <0>;
>>>> + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&osc16M>;
>>>> + clock-output-names = "cpus";
>>>> + };
>>>> +
>>>> + ahb0: ahb0_clk {
>>>> + compatible = "fixed-factor-clock";
>>>> + #clock-cells = <0>;
>>>> + clock-div = <1>;
>>>> + clock-mult = <1>;
>>>> + clocks = <&cpus_clk>;
>>>> + clock-output-names = "ahb0";
>>>> + };
>>>> +
>>>> + apb0: clk@01f0140c {
>>>> + compatible = "allwinner,sun8i-a23-apb0-clk";
>>>
>>> This is actually wrong, as it is wrong in sun9i-a80.dtsi.
>>> I've sent a patch series for it.
>> A83T apb0 is different from A80, and it's same as A23, so this should
>> be correct.
>> Please correct me in case I'm missing something.
>
> My user manual (v1.5.1) says A83T apb0 dividers (page. 246) are
> /1, /2, /3, /4, while the A23 is /1, /2, /4, /8.

As Vishnu pointed out on IRC, the A23 driver is wrong. They are in fact,
both one-based dividers. I'll send a patch to fix this.

ChenYu

> ChenYu
>
>>> Also the drivers for "allwinner,sun9i-a80-cpus-clk" and
>>> "allwinner,sun9i-a80-apbs-clk"
>>> are only compiled for CONFIG_MACH_SUN9I. Please add a patch to address this.
>> Okie.
>>>
>>> Regards
>>> ChenYu
>>>
>>>> + reg = <0x01f0140c 0x4>;
>>>> + #clock-cells = <0>;
>>>> + clocks = <&ahb0>;
>>>> + clock-output-names = "apb0";
>>>> + };
>>>> +
>>>> + apb0_gates: clk@01f01428 {
>>>> + compatible = "allwinner,sun8i-a83t-apb0-gates-clk";
>>>> + reg = <0x01f01428 0x4>;
>>>> + #clock-cells = <1>;
>>>> + clocks = <&apb0>;
>>>> + clock-indices = <0>, <1>,
>>>> + <2>, <3>,
>>>> + <4>, <6>, <7>;
>>>> + clock-output-names = "apb0_pio", "apb0_ir",
>>>> + "apb0_timer", "apb0_rsb",
>>>> + "apb0_uart", "apb0_i2c0", "apb0_twd";
>>>> + };
>>>> };
>>>>
>>>> soc {
>>>> @@ -434,5 +472,11 @@
>>>> #interrupt-cells = <3>;
>>>> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>>>> };
>>>> +
>>>> + apb0_reset: reset@01f014b0 {
>>>> + reg = <0x01f014b0 0x4>;
>>>> + compatible = "allwinner,sun6i-a31-clock-reset";
>>>> + #reset-cells = <1>;
>>>> + };
>>>> };
>>>> };
>>>> --
>>>> 1.9.1
>>>>

\
 
 \ /
  Last update: 2016-02-15 11:01    [W:0.098 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site