lkml.org 
[lkml]   [2016]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mfd: stmpe: add the proper PWM resources
On Sun, 14 Feb 2016, Linus Walleij wrote:

> This adds the PWM resources to the STMPE MFD driver, so that
> it can properly grab and use them.
>
> Cc: linux-pwm@vger.kernel.org
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog: split this patch off from the PWM driver and sent
> separately. This can be merged separately too so we need no
> criss-cross between MFD and PWM anymore, Lee: this one is for
> you if it looks all right, excess newlines are gone too.
> ---
> drivers/mfd/stmpe.c | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> index 8222e374e4b1..fb8f9e8b75df 100644
> --- a/drivers/mfd/stmpe.c
> +++ b/drivers/mfd/stmpe.c
> @@ -334,6 +334,31 @@ static const struct mfd_cell stmpe_keypad_cell = {
> };
>
> /*
> + * PWM (1601, 2401, 2403)
> + */
> +static struct resource stmpe_pwm_resources[] = {
> + {
> + .name = "PWM0",
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .name = "PWM1",
> + .flags = IORESOURCE_IRQ,
> + },
> + {
> + .name = "PWM2",
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static const struct mfd_cell stmpe_pwm_cell = {
> + .name = "stmpe-pwm",
> + .of_compatible = "st,stmpe-pwm",
> + .resources = stmpe_pwm_resources,
> + .num_resources = ARRAY_SIZE(stmpe_pwm_resources),
> +};
> +
> +/*
> * STMPE801
> */
> static const u8 stmpe801_regs[] = {
> @@ -537,6 +562,11 @@ static struct stmpe_variant_block stmpe1601_blocks[] = {
> .irq = STMPE1601_IRQ_KEYPAD,
> .block = STMPE_BLOCK_KEYPAD,
> },
> + {
> + .cell = &stmpe_pwm_cell,
> + .irq = STMPE1601_IRQ_PWM0,
> + .block = STMPE_BLOCK_PWM,
> + },
> };
>
> /* supported autosleep timeout delay (in msecs) */
> @@ -771,6 +801,11 @@ static struct stmpe_variant_block stmpe24xx_blocks[] = {
> .irq = STMPE24XX_IRQ_KEYPAD,
> .block = STMPE_BLOCK_KEYPAD,
> },
> + {
> + .cell = &stmpe_pwm_cell,
> + .irq = STMPE24XX_IRQ_PWM0,
> + .block = STMPE_BLOCK_PWM,
> + },
> };
>
> static int stmpe24xx_enable(struct stmpe *stmpe, unsigned int blocks,

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2016-02-15 10:21    [W:0.038 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site