lkml.org 
[lkml]   [2016]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] net: fec: Add "phy-reset-active-low" property to DT
On Tue, Feb 09, 2016 at 09:01:12PM +0100, Bernhard Walle wrote:
> We need that for a custom hardware that needs the reverse reset
> sequence.
>
> Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
> ---
> Changes compared to v1:
> - Add documentation to 'phy-reset-gpios' that flags are ignored
> as suggested by Andrew Lunn.
>
> Documentation/devicetree/bindings/net/fsl-fec.txt | 7 ++++++-
> drivers/net/ethernet/freescale/fec_main.c | 8 ++++++--
> 2 files changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt
> index a9eb611..0caa429 100644
> --- a/Documentation/devicetree/bindings/net/fsl-fec.txt
> +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt
> @@ -7,11 +7,16 @@ Required properties:
> - phy-mode : See ethernet.txt file in the same directory
>
> Optional properties:
> -- phy-reset-gpios : Should specify the gpio for phy reset
> +- phy-reset-gpios : Should specify the gpio for phy reset. Additional
> + flags are ignored, see the non-standard 'phy-reset-active-low' property
> + instead.
> - phy-reset-duration : Reset duration in milliseconds. Should present
> only if property "phy-reset-gpios" is available. Missing the property
> will have the duration be 1 millisecond. Numbers greater than 1000 are
> invalid and 1 millisecond will be used instead.
> +- phy-reset-active-low : If present then the reset sequence using the GPIO
> + specified in the "phy-reset-gpios" property is reversed (H=reset state,
> + L=operation state).

This is what the gpio flags are for. Why can't you use that?

> - phy-supply : regulator that powers the Ethernet PHY.
> - phy-handle : phandle to the PHY device connected to this device.
> - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory.

\
 
 \ /
  Last update: 2016-02-12 16:41    [W:1.328 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site