lkml.org 
[lkml]   [2016]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/2] usb: musb: Fix DMA for host mode
Date
From: Cristian Birsan <cristian.birsan@microchip.com>

Commit ac33cdb16681 ("usb: musb: Remove ifdefs for musb_host_rx in
musb_host.c part5") introduces a problem setting DMA host mode.

This commit fixes the done condition that advances the musb schedule.
Without this patch the the msub_advance_schedule() is called immediately
after receiving an endpoint RX interrupt without waiting for the DMA
transfer to complete. As a consequence when the dma complete interrupt
arrives the in_qh member of hw_ep is already null an the musb_host_rx()
exits on !urb error case.

Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
---
Changes since v2:
- Put function call in if condition.
Changes since v1:
- Don't add unecessary new variable. Just correct done.
---
drivers/usb/musb/musb_host.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 795a45b..6a81066 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -2003,10 +2003,9 @@ void musb_host_rx(struct musb *musb, u8 epnum)
qh->offset,
urb->transfer_buffer_length);

- done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
- urb, xfer_len,
- iso_err);
- if (done)
+ if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
+ urb, xfer_len,
+ iso_err))
goto finish;
else
dev_err(musb->controller, "error: rx_dma failed\n");
--
1.7.9.5
\
 
 \ /
  Last update: 2016-02-11 17:21    [W:0.037 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site