lkml.org 
[lkml]   [2016]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 0/8] arm: Add Artpec-6 SoC
Date
On Thursday 11 February 2016 15:04:34 Lars Persson wrote:
> Basic support for the Axis Artpec-6 ARM SoC. Timers, interrupts, UARTs and
> ethernet are wired up.
>
> Changes since v1:
> - Corrected bindings for axis,artpec6-pll1-clock.
> - Moved the uart aliases to the board dts.
> - Kconfig cleanup.
> - Added a device tree binding for the dma configuration.
> - Added CONFIG_SYNOPSYS_DWC_ETH_QOS to multi_v7_defconfig.
> - Added binding documentation for axis,artpec6-dev-board.
>
> Lars Persson (8):
> clk: add device tree binding for artpec-6 pll1 clock
> clk: add artpec-6 pll1 clock driver
> arm: add device-tree SoC bindings for Axis Artpec-6
> arm: dts: add Artpec-6 SoC dtsi file
> arm: dts: add Artpec-6 development board dts
> arm: initial machine port for artpec-6 SoC
> arm: multi_v7_defconfig: add MACH_ARTPEC6
> arm: mach-artpec: add entry to MAINTAINERS

Looks good except for the one issue I pointed out in patch 3 (and also 6).
Once that is resolved, please submit the new platform for inclusion by sending
it to arm@kernel.org.

The first two patches should get merged through the drivers/clk maintainer tree,
please submit them separately there.

Arnd

\
 
 \ /
  Last update: 2016-02-11 15:41    [W:0.079 / U:0.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site