lkml.org 
[lkml]   [2016]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] i2c: i801: Intel DNV_N device IDs SMBus
Hi Alexandra,

On Fri, 5 Feb 2016 16:00:53 -0800, Alexandra Yates wrote:
> Adding Intel codename DNV_N platform device IDs for SMBus.
>
> Signed-off-by: Alexandra Yates <alexandra.yates@linux.intel.com>
> ---
> drivers/i2c/busses/i2c-i801.c | 4 ++++

Please also update Documentation/i2c/busses/i2c-i801 and
drivers/i2c/busses/Kconfig.

> 1 file changed, 4 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index f62d697..fb1a3ca 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -60,6 +60,7 @@
> * BayTrail (SOC) 0x0f12 32 hard yes yes yes
> * Sunrise Point-H (PCH) 0xa123 32 hard yes yes yes
> * Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
> + * DNV_N (SOC) 0x19ac 32 hard yes yes yes
> * DNV (SOC) 0x19df 32 hard yes yes yes
> * Broxton (SOC) 0x5ad4 32 hard yes yes yes
> * Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
> @@ -206,6 +207,7 @@
> #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS 0x9ca2
> #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS 0xa123
> #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
> +#define PCI_DEVICE_ID_INTEL_DNV_N_SMBUS 0x19ac
> #define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
> #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
> #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
> @@ -871,6 +873,7 @@ static const struct pci_device_id i801_ids[] = {
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
> + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_N_SMBUS) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
> { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
> @@ -1271,6 +1274,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
> switch (dev->device) {
> case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
> case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
> + case PCI_DEVICE_ID_INTEL_DNV_N_SMBUS:
> case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
> priv->features |= FEATURE_I2C_BLOCK_READ;
> priv->features |= FEATURE_IRQ;

This last change doesn't apply here, as it conflicts with the other
i2c-i801 patch you just sent ("i2c: i801: Intel DNV_N device IDs
SMBus"). When you send multiple patches for the same driver, please
make sure they cleanly stack on top of each other.

Thanks,
--
Jean Delvare
SUSE L3 Support

\
 
 \ /
  Last update: 2016-02-10 11:01    [W:0.037 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site