Messages in this thread | | | Date | Mon, 1 Feb 2016 12:59:24 -0800 | From | Greg KH <> | Subject | Re: [PATCH] tty: add Moxa Smartio MUE serial driver |
| |
On Mon, Feb 01, 2016 at 09:34:19PM +0100, Mathieu OTHACEHE wrote: > Add a driver which supports: > > - CP-102E: 2 ports RS232 PCIE card > - CP-102EL: 2 ports RS232 PCIE card > - CP-132EL: 2 ports RS422/485 PCIE card > - CP-114EL: 4 ports RS232/422/485 PCIE card > - CP-104EL-A: 4 ports RS232 PCIE card > - CP-168EL-A: 8 ports RS232 PCIE card > - CP-118EL-A: 8 ports RS232/422/485 PCIE card > - CP-118E-A: 8 ports RS422/485 PCIE card > - CP-138E-A: 8 ports RS422/485 PCIE card > - CP-134EL-A: 4 ports RS422/485 PCIE card > - CP-116E-A (A): 8 ports RS232/422/485 PCIE card > - CP-116E-A (B): 8 ports RS232/422/485 PCIE card > > This driver is based on 1.16.7 GPL MOXA driver written by Eric Lo > and available on MOXA website. The original driver was based on > Linux serial driver. > > Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com> > --- > > Hi, > > Here is a new driver for MOXA Smartio MUE cards. It is based > on the vendor driver available on MOXA website and on the > mainline mxser driver. > > I was able to test it on a CP-168EL-A card on PC. Some of the > cards (118E-A, 138E-A, 134EL-A, 116E-A-A et 116E-A-B) have > a CPLD module programmable via GPIO. > For now, I dropped all the code related to CPLD/GPIO because I > can't test it on my card. > > Mathieu > > MAINTAINERS | 5 + > drivers/tty/Kconfig | 10 + > drivers/tty/Makefile | 1 + > drivers/tty/mxupcie.c | 1874 +++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/tty/mxupcie.h | 129 ++++
Minor nit, but why do you need a .h file here when no one else includes it? Why not just put it into the .c file to keep things nice and self-contained?
thanks,
greg k-h
| |