lkml.org 
[lkml]   [2016]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/4] mtd:spi_nor: Disable Micron flash HW protection
Date
For Micron family ,The status register write enable/disable bit,
provides hardware data protection for the device.
When the enable/disable bit is set to 1, the status register
nonvolatile bits become read-only and the WRITE STATUS REGISTER
operation will not execute.

Signed-off-by: Yunhui Cui <B56489@freescale.com>
---
drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index ed0c19c..917f814 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -39,6 +39,7 @@

#define SPI_NOR_MAX_ID_LEN 6
#define SPI_NOR_MAX_ADDR_WIDTH 4
+#define SPI_NOR_MICRON_WRITE_ENABLE 0x7f

struct flash_info {
char *name;
@@ -1238,6 +1239,14 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
write_sr(nor, 0);
}

+ if (JEDEC_MFR(info) == SNOR_MFR_MICRON) {
+ ret = read_sr(nor);
+ ret &= SPI_NOR_MICRON_WRITE_ENABLE;
+
+ write_enable(nor);
+ write_sr(nor, ret);
+ }
+
if (!mtd->name)
mtd->name = dev_name(dev);
mtd->priv = nor;
--
2.1.0.27.g96db324
\
 
 \ /
  Last update: 2016-02-01 13:21    [W:2.090 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site