lkml.org 
[lkml]   [2016]   [Dec]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1 2/2] usb:serial: Implement Fintek f81534 break on/off
Date
Implement Fintek f81534 break on/off with LCR register
It's the same with 16550A LCR register layout

We'll add a shadow LCR variable to save the final LCR we
had set due to the "read ep0" operations maybe slow down all
the serial ports performance.

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
---
drivers/usb/serial/f81534.c | 40 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)

diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
index 8282a6a..1b6ba81 100644
--- a/drivers/usb/serial/f81534.c
+++ b/drivers/usb/serial/f81534.c
@@ -126,8 +126,10 @@ struct f81534_serial_private {

struct f81534_port_private {
struct mutex mcr_mutex;
+ struct mutex lcr_mutex;
unsigned long tx_empty;
spinlock_t msr_lock;
+ u8 shadow_lcr;
u8 shadow_mcr;
u8 shadow_msr;
u8 phy_num;
@@ -683,6 +685,7 @@ static void f81534_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old_termios)
{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
u8 new_lcr = 0;
int status;
u32 baud;
@@ -721,6 +724,10 @@ static void f81534_set_termios(struct tty_struct *tty,
break;
}

+ mutex_lock(&port_priv->lcr_mutex);
+ port_priv->shadow_lcr = new_lcr;
+ mutex_unlock(&port_priv->lcr_mutex);
+
baud = tty_get_baud_rate(tty);
if (!baud)
return;
@@ -812,6 +819,35 @@ static int f81534_read_msr(struct usb_serial_port *port)
return 0;
}

+static void f81534_set_break(struct usb_serial_port *port, bool enable)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int status;
+
+ mutex_lock(&port_priv->lcr_mutex);
+
+ if (enable)
+ port_priv->shadow_lcr |= UART_LCR_SBC;
+ else
+ port_priv->shadow_lcr &= ~UART_LCR_SBC;
+
+ status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+ port_priv->shadow_lcr);
+ if (status) {
+ dev_err(&port->dev, "%s: set break failed: %x\n", __func__,
+ status);
+ }
+
+ mutex_unlock(&port_priv->lcr_mutex);
+}
+
+static void f81534_break_ctl(struct tty_struct *tty, int break_state)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ f81534_set_break(port, break_state);
+}
+
static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv =
@@ -877,6 +913,8 @@ static void f81534_close(struct usb_serial_port *port)
}

mutex_unlock(&serial_priv->urb_mutex);
+
+ f81534_set_break(port, false);
}

static int f81534_get_serial_info(struct usb_serial_port *port,
@@ -1244,6 +1282,7 @@ static int f81534_port_probe(struct usb_serial_port *port)

spin_lock_init(&port_priv->msr_lock);
mutex_init(&port_priv->mcr_mutex);
+ mutex_init(&port_priv->lcr_mutex);

/* Assign logic-to-phy mapping */
port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
@@ -1389,6 +1428,7 @@ static int f81534_resume(struct usb_serial *serial)
.dtr_rts = f81534_dtr_rts,
.process_read_urb = f81534_process_read_urb,
.ioctl = f81534_ioctl,
+ .break_ctl = f81534_break_ctl,
.tiocmget = f81534_tiocmget,
.tiocmset = f81534_tiocmset,
.write_bulk_callback = f81534_write_usb_callback,
--
1.9.1
\
 
 \ /
  Last update: 2016-12-09 06:40    [W:0.186 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site