lkml.org 
[lkml]   [2016]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC v3 09/10] iommu/arm-smmu: Implement reserved region get/put callbacks
From
Date
Hi Robin,

On 07/12/2016 19:24, Robin Murphy wrote:
> On 07/12/16 15:02, Auger Eric wrote:
>> Hi Robin,
>> On 06/12/2016 19:55, Robin Murphy wrote:
>>> On 15/11/16 13:09, Eric Auger wrote:
>>>> The get() populates the list with the PCI host bridge windows
>>>> and the MSI IOVA range.
>>>>
>>>> At the moment an arbitray MSI IOVA window is set at 0x8000000
>>>> of size 1MB. This will allow to report those info in iommu-group
>>>> sysfs?
>>
>>
>> First thank you for reviewing the series. This is definitively helpful!
>>>>
>>>> Signed-off-by: Eric Auger <eric.auger@redhat.com>
>>>>
>>>> ---
>>>>
>>>> RFC v2 -> v3:
>>>> - use existing get/put_resv_regions
>>>>
>>>> RFC v1 -> v2:
>>>> - use defines for MSI IOVA base and length
>>>> ---
>>>> drivers/iommu/arm-smmu.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 52 insertions(+)
>>>>
>>>> diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
>>>> index 8f72814..81f1a83 100644
>>>> --- a/drivers/iommu/arm-smmu.c
>>>> +++ b/drivers/iommu/arm-smmu.c
>>>> @@ -278,6 +278,9 @@ enum arm_smmu_s2cr_privcfg {
>>>>
>>>> #define FSYNR0_WNR (1 << 4)
>>>>
>>>> +#define MSI_IOVA_BASE 0x8000000
>>>> +#define MSI_IOVA_LENGTH 0x100000
>>>> +
>>>> static int force_stage;
>>>> module_param(force_stage, int, S_IRUGO);
>>>> MODULE_PARM_DESC(force_stage,
>>>> @@ -1545,6 +1548,53 @@ static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
>>>> return iommu_fwspec_add_ids(dev, &fwid, 1);
>>>> }
>>>>
>>>> +static void arm_smmu_get_resv_regions(struct device *dev,
>>>> + struct list_head *head)
>>>> +{
>>>> + struct iommu_resv_region *region;
>>>> + struct pci_host_bridge *bridge;
>>>> + struct resource_entry *window;
>>>> +
>>>> + /* MSI region */
>>>> + region = iommu_alloc_resv_region(MSI_IOVA_BASE, MSI_IOVA_LENGTH,
>>>> + IOMMU_RESV_MSI);
>>>> + if (!region)
>>>> + return;
>>>> +
>>>> + list_add_tail(&region->list, head);
>>>> +
>>>> + if (!dev_is_pci(dev))
>>>> + return;
>>>> +
>>>> + bridge = pci_find_host_bridge(to_pci_dev(dev)->bus);
>>>> +
>>>> + resource_list_for_each_entry(window, &bridge->windows) {
>>>> + phys_addr_t start;
>>>> + size_t length;
>>>> +
>>>> + if (resource_type(window->res) != IORESOURCE_MEM &&
>>>> + resource_type(window->res) != IORESOURCE_IO)
>>>
>>> As Joerg commented elsewhere, considering anything other than memory
>>> resources isn't right (I appreciate you've merely copied my own mistake
>>> here). We need some other way to handle root complexes where the CPU
>>> MMIO views of PCI windows appear in PCI memory space - using the I/O
>>> address of I/O resources only works by chance on Juno, and it still
>>> doesn't account for config space. I suggest we just leave that out for
>>> the time being to make life easier (does it even apply to anything other
>>> than Juno?) and figure it out later.
>> OK so I understand I should remove IORESOURCE_IO check.
>>>
>>>> + continue;
>>>> +
>>>> + start = window->res->start - window->offset;
>>>> + length = window->res->end - window->res->start + 1;
>>>> + region = iommu_alloc_resv_region(start, length,
>>>> + IOMMU_RESV_NOMAP);
>>>> + if (!region)
>>>> + return;
>>>> + list_add_tail(&region->list, head);
>>>> + }
>>>> +}
>>>
>>> Either way, there's nothing SMMU-specific about PCI windows. The fact
>>> that we'd have to copy-paste all of this into the SMMUv3 driver
>>> unchanged suggests it should go somewhere common (although I would be
>>> inclined to leave the insertion of the fake MSI region to driver-private
>>> wrappers). As I said before, the current iova_reserve_pci_windows()
>>> simply wants splitting into appropriate public callbacks for
>>> get_resv_regions and apply_resv_regions.
>> Do you mean somewhere common in the arm-smmu subsystem (new file) or in
>> another subsystem (pci?)
>>
>> More generally the current implementation does not handle the case where
>> any of those PCIe host bridge window collide with the MSI window. To me
>> this is a flaw.
>> 1) Either we take into account the PCIe windows and prevent any
>> collision when allocating the MSI window.
>> 2) or we do not care about PCIe host bridge windows at kernel level.
>
> Even more generally, the MSI window also needs to avoid any other
> IOMMU-specific reserved regions as well - fortunately I don't think
> there's any current intersection between platforms with RMRR-type
> reservations and platforms which require MSI mapping - so I think we've
> got enough freedom for the moment, but it's certainly an argument in
> favour of ultimately expressing PCI windows through the same mechanism
> to keep everything in the same place. The other big advantage of
> reserved regions is that they will automatically apply to DMA domains as
> well.
>
>> If 1) we are back to the original issue of where do we put the MSI
>> window. Obviously at a place which might not be QEMU friendly anymore.
>> What allocation policy shall we use?
>>
>> Second option - sorry I may look stubborn - which I definitively prefer
>> and which was also advocated by Alex, we handle PCI host bridge windows
>> at user level. MSI window is reported through the iommu group sysfs.
>> PCIe host bridge windows can be enumerated through /proc/iomem. Both x86
>> iommu and arm smmu would report an MSI reserved window. ARM MSI window
>> would become a de facto reserved window for guests.
>
> So from the ABI perspective, the sysfs iommu_group/*/reserved_regions
> represents a minimum set of regions (MSI, RMRR, etc.) which definitely
> *must* be reserved, but offers no guarantee that there aren't also other
> regions not represented there. That seems reasonable to start with, and
> still leaves us free to expand the scope of reserved regions in future
> without breaking anything.
>
>> Thoughts?
>
> I like the second option too - "grep PCI /proc/iomem" already catches
> more than enumerating the resources does (i.e. ECAM space) - and neither
> does it preclude growing the more extensive version on top over time.
>
> For the sake of moving forward, I'd be happy with just dropping the PCI
> stuff from here, and leaving the SMMU drivers exposing the single
> hard-coded MSI region directly (to be fair, it'd hardly be the first
> function which is identical between the two).
OK cool

Thanks

Eric
We can take a look into
> making iommu-dma implement PCI windows as nomap resv_regions properly as
> an orthogonal thing (for the sake of DMA domains), after which we should
> be in a position to drop the hard-coding and start placing the MSI
> window dynamically where appropriate.
>
> Robin.
>
>>>> +static void arm_smmu_put_resv_regions(struct device *dev,
>>>> + struct list_head *head)
>>>> +{
>>>> + struct iommu_resv_region *entry, *next;
>>>> +
>>>> + list_for_each_entry_safe(entry, next, head, list)
>>>> + kfree(entry);
>>>> +}
>>>> +
>>>> static struct iommu_ops arm_smmu_ops = {
>>>> .capable = arm_smmu_capable,
>>>> .domain_alloc = arm_smmu_domain_alloc,
>>>> @@ -1560,6 +1610,8 @@ static int arm_smmu_of_xlate(struct device *dev, struct of_phandle_args *args)
>>>> .domain_get_attr = arm_smmu_domain_get_attr,
>>>> .domain_set_attr = arm_smmu_domain_set_attr,
>>>> .of_xlate = arm_smmu_of_xlate,
>>>> + .get_resv_regions = arm_smmu_get_resv_regions,
>>>> + .put_resv_regions = arm_smmu_put_resv_regions,
>>>> .pgsize_bitmap = -1UL, /* Restricted during device attach */
>>>> };
>>>>
>>>>
>>>
>>>
>>> _______________________________________________
>>> linux-arm-kernel mailing list
>>> linux-arm-kernel@lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>>>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

\
 
 \ /
  Last update: 2016-12-08 08:59    [W:0.073 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site