lkml.org 
[lkml]   [2016]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RT] net: Have __napi_schedule_irqoff() disable interrupts on RT
On Wed, 7 Dec 2016 07:53:26 -0500
Steven Rostedt <rostedt@goodmis.org> wrote:

> On Wed, 7 Dec 2016 10:10:40 +0100
> Sebastian Andrzej Siewior <bigeasy@linutronix.de> wrote:
>
> > On 2016-12-06 17:50:30 [-0500], Steven Rostedt wrote:
> > > A customer hit a crash where the napi sd->poll_list became corrupted.
> > > The customer had the bnx2x driver, which does a
> > > __napi_schedule_irqoff() in its interrupt handler. Unfortunately, when
> > > running with CONFIG_PREEMPT_RT_FULL, this interrupt handler is run as a
> > > thread and is preemptable. The call to ____napi_schedule() must be done
> > > with interrupts disabled to protect the per cpu softnet_data's
> > > poll_list, which is protected by disabling interrupts (disabling
> > > preemption is enough when all interrupts are threaded and
> > > local_bh_disable() can't preempt).
> > >
> > > As bnx2x isn't the only driver that does this, the safest thing to do
> > > is to make __napi_schedule_irqoff() call __napi_schedule() instead when
> > > CONFIG_PREEMPT_RT_FULL is enabled, which will call local_irq_save()
> > > before calling ____napi_schedule().
> >
> > It would work RT wise. But don't have the same problem if you boot the
> > kernel with threadirqs ?
> >
>
> I thought the same at first, but looking into the code for forced
> threaded interrupts, I saw this:
>
> local_bh_disable();
> ret = action->thread_fn(action->irq, action->dev_id);
> irq_finalize_oneshot(desc, action);
> local_bh_enable();
>
> Where without CONFIG_PREEMPT_RT_FULL, local_bh_disable() also disables
> preemption. Then all the handlers still can not be preempted by another
> handler. So it appears to be safe as well.
>

Actually, I was hoping that the change log explained this. Should I
reword it better?

"poll_list, which is protected by disabling interrupts (disabling
preemption is enough when all interrupts are threaded and
local_bh_disable() can't preempt)."


-- Steve

\
 
 \ /
  Last update: 2016-12-07 16:29    [W:0.045 / U:0.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site