lkml.org 
[lkml]   [2016]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings
On Wed, Nov 30, 2016 at 09:16:58AM +0100, Peter Rosin wrote:
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
> .../bindings/iio/multiplexer/iio-mux.txt | 40 ++++++++++++++++++++++
> MAINTAINERS | 6 ++++
> 2 files changed, 46 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt

I'm still not convinced about this binding, but don't really have more
comments ATM. Sending 6 versions in 2 weeks or so doesn't really help
either.

> diff --git a/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> new file mode 100644
> index 000000000000..8080cf790d82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> @@ -0,0 +1,40 @@
> +IIO multiplexer bindings
> +
> +If a multiplexer is used to select which hardware signal is fed to
> +e.g. an ADC channel, these bindings describe that situation.
> +
> +Required properties:
> +- compatible : "iio-mux"

This is a Linuxism. perhaps "adc-mux".

> +- io-channels : Channel node of the parent channel that has multiplexed
> + input.
> +- io-channel-names : Should be "parent".
> +- #address-cells = <1>;
> +- #size-cells = <0>;
> +- mux-controls : Mux controller node to use for operating the mux
> +- channels : List of strings, labeling the mux controller states.
> +
> +The multiplexer state as described in ../misc/mux-controller.txt
> +
> +For each non-empty string in the channels property, an iio channel will
> +be created. The number of this iio channel is the same as the index into
> +the list of strings in the channels property, and also matches the mux
> +controller state.
> +
> +Example:
> + mux: mux-controller {
> + compatible = "mux-gpio";
> + #mux-control-cells = <0>;
> +
> + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
> + <&pioA 1 GPIO_ACTIVE_HIGH>;
> + };
> +
> + adc-mux {
> + compatible = "iio-mux";
> + io-channels = <&adc 0>;
> + io-channel-names = "parent";
> +
> + mux-controls = <&mux>;
> +
> + channels = "sync", "in", system-regulator";
> + };

\
 
 \ /
  Last update: 2016-12-06 00:27    [W:0.182 / U:2.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site