lkml.org 
[lkml]   [2016]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 net-next v3 1/4] net: dsa: mv88e6xxx: add helper to disable ports
Date
Before resetting a switch, the ports should be set to the Disabled state
and the transmit queues should be drained.

Add an helper to explicit that.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/chip.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index ca453f3..1d4d3be 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2356,6 +2356,26 @@ static void mv88e6xxx_port_bridge_leave(struct dsa_switch *ds, int port)
mutex_unlock(&chip->reg_lock);
}

+static int mv88e6xxx_disable_ports(struct mv88e6xxx_chip *chip)
+{
+ int i, err;
+
+ /* Set all ports to the Disabled state */
+ for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
+ err = mv88e6xxx_port_set_state(chip, i,
+ PORT_CONTROL_STATE_DISABLED);
+ if (err)
+ return err;
+ }
+
+ /* Wait for transmit queues to drain,
+ * i.e. 2ms for a maximum frame to be transmitted at 10 Mbps.
+ */
+ usleep_range(2000, 4000);
+
+ return 0;
+}
+
static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
{
bool ppu_active = mv88e6xxx_has(chip, MV88E6XXX_FLAG_PPU_ACTIVE);
@@ -2364,18 +2384,10 @@ static int mv88e6xxx_switch_reset(struct mv88e6xxx_chip *chip)
unsigned long timeout;
u16 reg;
int err;
- int i;

- /* Set all ports to the disabled state. */
- for (i = 0; i < mv88e6xxx_num_ports(chip); i++) {
- err = mv88e6xxx_port_set_state(chip, i,
- PORT_CONTROL_STATE_DISABLED);
- if (err)
- return err;
- }
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 4000);
+ err = mv88e6xxx_disable_ports(chip);
+ if (err)
+ return err;

/* If there is a gpio connected to the reset pin, toggle it */
if (gpiod) {
--
2.10.2
\
 
 \ /
  Last update: 2016-12-05 23:34    [W:0.065 / U:2.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site