lkml.org 
[lkml]   [2016]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] SPCR: check bit width for the 16550 UART
Date
Check the 'Register Bit Width' field of the ACPI Generic Address
Structure that specifies the address of the UART registers to
decide if the driver should use "mmio32" access instead of "mmio".

If the driver is other than 16550 the access with is defined
by the Interface Type field of the SPCR table.

For discussion:

https://lkml.kernel.org/r/7fa523de-3fbb-1566-f521-927143f73d1e@redhat.com

Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org>
Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org>
Reported-by: Heyi Guo <heyi.guo@linaro.org>
---
drivers/acpi/spcr.c | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/drivers/acpi/spcr.c b/drivers/acpi/spcr.c
index e8d7bc7..6c6710b 100644
--- a/drivers/acpi/spcr.c
+++ b/drivers/acpi/spcr.c
@@ -70,6 +70,10 @@ int __init parse_spcr(bool earlycon)
break;
case ACPI_DBG2_16550_COMPATIBLE:
case ACPI_DBG2_16550_SUBSET:
+ if (table->serial_port.space_id ==
+ ACPI_ADR_SPACE_SYSTEM_MEMORY &&
+ table->serial_port.bit_width == 32)
+ iotype = "mmio32";
uart = "uart";
break;
default:
--
2.10.2
\
 
 \ /
  Last update: 2016-12-05 14:06    [W:0.073 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site