lkml.org 
[lkml]   [2016]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: e1000e on Thinkpad x60: gigabit not available due to "SmartSpeed"
On Fri 2016-09-02 12:57:35, Lennart Sorensen wrote:
> On Thu, Sep 01, 2016 at 02:58:13PM -0700, Greg wrote:
> > On Thu, 2016-09-01 at 22:14 +0200, Pavel Machek wrote:
> > > Hi!
> > >
> > > I have trouble getting 1000mbit out of my ethernet card.
> > >
> > > I tried direct connection between two PCs with different cables, and
> > > no luck.
> > >
> > > Today I tried connection to 1000mbit switch, and no luck, either. (Two
> > > cables, one was cat6, both short).
> > >
> > > My computer sees 1000mbit being advertised by the other side, but does
> > > not advertise 1000mbit, "Link Speed was downgraded by SmartSpeed".
> >
> > Check your cables?
> >
> > https://vmxp.wordpress.com/2015/01/06/1gbe-intel-nic-throttled-to-100mbit-by-smartspeed/
>
> Of course if it isn't the cable, then it could even be a broken pin in
> the port. As far as I can tell, anything that causes one of the 3rd
> or 4th pairs of wires to not work will degrade to 100Mbit on just the
> first 2 pairs of wires and give that message. Some badly implemented
> switches can also cause it of course.

Ok, so it seems like broken pin in the port. I realized I had docking
station available for the machine, and when connecting using that
connector (not internal notebook one), I get gigabit speed.

Thanks and best regards,
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-12-05 11:47    [W:0.120 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site