lkml.org 
[lkml]   [2016]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] scsi: 3w-sas: set errno on failures
Date
From: Pan Bian <bianpan2016@163.com>

On some error paths (e.g. pci_iomap() returns a NULL pointer), the value
of return variable retval is 0. 0 means no error. This patch fixes the
bug, set retval with negative errno on error paths.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189001

Signed-off-by: Pan Bian <bianpan2016@163.com>
---
drivers/scsi/3w-sas.c | 3 +++
1 file changed, 3 insertions(+)

diff --git a/drivers/scsi/3w-sas.c b/drivers/scsi/3w-sas.c
index f837485..65b42b4 100644
--- a/drivers/scsi/3w-sas.c
+++ b/drivers/scsi/3w-sas.c
@@ -1600,6 +1600,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)

if (twl_initialize_device_extension(tw_dev)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Failed to initialize device extension");
+ retval = -ENODEV;
goto out_free_device_extension;
}

@@ -1614,6 +1615,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
tw_dev->base_addr = pci_iomap(pdev, 1, 0);
if (!tw_dev->base_addr) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1c, "Failed to ioremap");
+ retval = -ENOMEM;
goto out_release_mem_region;
}

@@ -1623,6 +1625,7 @@ static int twl_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id)
/* Initialize the card */
if (twl_reset_sequence(tw_dev, 0)) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1d, "Controller reset failed during probe");
+ retval = -ENODEV;
goto out_iounmap;
}

--
1.9.1

\
 
 \ /
  Last update: 2016-12-04 06:38    [W:0.032 / U:1.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site