lkml.org 
[lkml]   [2016]   [Dec]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
* Kishon Vijay Abraham I <kishon@ti.com> [161230 00:08]:
> Add 'gpios' property to pcie1 dt node and populate it with
> GPIO3_23 in order to drive PCIE_RESETn high.
>
> This gets PCIe cards to be detected in AM572X IDK board.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> arch/arm/boot/dts/am572x-idk.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
> index 27d9149..1540f7a 100644
> --- a/arch/arm/boot/dts/am572x-idk.dts
> +++ b/arch/arm/boot/dts/am572x-idk.dts
> @@ -87,3 +87,7 @@
> &sn65hvs882 {
> load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
> };
> +
> +&pcie1 {
> + gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
> +};

I'll apply this into omap-for-v4.10/fixes thanks.

Tony

\
 
 \ /
  Last update: 2016-12-30 20:01    [W:0.477 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site