lkml.org 
[lkml]   [2016]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 4/6] usb: phy: qcom-8x16-usb: Replace the extcon API
Date
This patch uses the resource-managed extcon API for extcon_register_notifier()
and replaces the deprecated extcon API as following:
- extcon_get_cable_state_() -> extcon_get_state()

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
---
drivers/usb/phy/phy-qcom-8x16-usb.c | 13 ++++---------
1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/phy/phy-qcom-8x16-usb.c b/drivers/usb/phy/phy-qcom-8x16-usb.c
index d8593adb3621..fdf686398772 100644
--- a/drivers/usb/phy/phy-qcom-8x16-usb.c
+++ b/drivers/usb/phy/phy-qcom-8x16-usb.c
@@ -187,7 +187,7 @@ static int phy_8x16_init(struct usb_phy *phy)
val = ULPI_PWR_OTG_COMP_DISABLE;
usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));

- state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
+ state = extcon_get_state(qphy->vbus_edev, EXTCON_USB);
if (state)
phy_8x16_vbus_on(qphy);
else
@@ -316,23 +316,20 @@ static int phy_8x16_probe(struct platform_device *pdev)
goto off_clks;

qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
- ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);
+ ret = devm_extcon_register_notifier(&pdev->dev, qphy->vbus_edev,
+ EXTCON_USB, &qphy->vbus_notify);
if (ret < 0)
goto off_power;

ret = usb_add_phy_dev(&qphy->phy);
if (ret)
- goto off_extcon;
+ goto off_power;

qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
register_reboot_notifier(&qphy->reboot_notify);

return 0;

-off_extcon:
- extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);
off_power:
regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
off_clks:
@@ -347,8 +344,6 @@ static int phy_8x16_remove(struct platform_device *pdev)
struct phy_8x16 *qphy = platform_get_drvdata(pdev);

unregister_reboot_notifier(&qphy->reboot_notify);
- extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
- &qphy->vbus_notify);

/*
* Ensure that D+/D- lines are routed to uB connector, so
--
1.9.1
\
 
 \ /
  Last update: 2016-12-30 05:10    [W:0.080 / U:1.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site