lkml.org 
[lkml]   [2016]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 RESEND 07/11] pwm: imx: Provide atomic PWM support for i.MX PWMv2
Hi Boris,

> Hi Lukasz,
>
> On Mon, 26 Dec 2016 23:55:57 +0100
> Lukasz Majewski <l.majewski@majess.pl> wrote:
>
> > This commit provides apply() callback implementation for i.MX's
> > PWMv2.
> >
> > Suggested-by: Stefan Agner <stefan@agner.ch>
> > Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > Signed-off-by: Lukasz Majewski <l.majewski@majess.pl>
> > Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
> > ---
> > Changes for v3:
> > - Remove ipg clock enable/disable functions
> >
> > Changes for v2:
> > - None
> > ---
> > drivers/pwm/pwm-imx.c | 70
> > +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed,
> > 70 insertions(+)
> >
> > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
> > index ebe9b0c..cd53c05 100644
> > --- a/drivers/pwm/pwm-imx.c
> > +++ b/drivers/pwm/pwm-imx.c
> > @@ -159,6 +159,75 @@ static void imx_pwm_wait_fifo_slot(struct
> > pwm_chip *chip, }
> > }
> >
> > +static int imx_pwm_apply_v2(struct pwm_chip *chip, struct
> > pwm_device *pwm,
> > + struct pwm_state *state)
> > +{
> > + unsigned long period_cycles, duty_cycles, prescale;
> > + struct imx_chip *imx = to_imx_chip(chip);
> > + struct pwm_state cstate;
> > + unsigned long long c;
> > + u32 cr = 0;
> > + int ret;
> > +
> > + pwm_get_state(pwm, &cstate);
> > +
> > + c = clk_get_rate(imx->clk_per);
> > + c *= state->period;
> > +
> > + do_div(c, 1000000000);
> > + period_cycles = c;
> > +
> > + prescale = period_cycles / 0x10000 + 1;
> > +
> > + period_cycles /= prescale;
> > + c = (unsigned long long)period_cycles * state->duty_cycle;
> > + do_div(c, state->period);
> > + duty_cycles = c;
> > +
> > + /*
> > + * according to imx pwm RM, the real period value should be
> > + * PERIOD value in PWMPR plus 2.
> > + */
> > + if (period_cycles > 2)
> > + period_cycles -= 2;
> > + else
> > + period_cycles = 0;
> > +
> > + /* Enable the clock if the PWM is being enabled. */
> > + if (state->enabled && !cstate.enabled) {
> > + ret = clk_prepare_enable(imx->clk_per);
> > + if (ret)
> > + return ret;
> > + }
> > +
> > + /*
> > + * Wait for a free FIFO slot if the PWM is already
> > enabled, and flush
> > + * the FIFO if the PWM was disabled and is about to be
> > enabled.
> > + */
> > + if (cstate.enabled)
> > + imx_pwm_wait_fifo_slot(chip, pwm);
> > + else if (state->enabled)
> > + imx_pwm_sw_reset(chip);
> > +
> > + writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
> > + writel(period_cycles, imx->mmio_base + MX3_PWMPR);
> > +
> > + cr |= MX3_PWMCR_PRESCALER(prescale) |
> > + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
> > + MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
> > +
> > + if (state->enabled)
> > + cr |= MX3_PWMCR_EN;
> > +
> > + writel(cr, imx->mmio_base + MX3_PWMCR);
> > +
> > + /* Disable the clock if the PWM is being disabled. */
> > + if (!state->enabled && cstate.enabled)
> > + clk_disable_unprepare(imx->clk_per);
> > +
> > + return 0;
> > +}
> > +
>
> Stefan suggested to rework this function to avoid unneeded
> duty/period calculation and reg write when disabling the PWM. Why
> didn't you send a v4 addressing that instead of resending the exact
> same v3?

The discussion between you and Stefan was in this thread:
http://patchwork.ozlabs.org/patch/689790/

Stefan proposed change, you replied with your concerns and that is all.
No clear decision what to change until today when Stefan prepared
separate (concise) patch (now I see what is the problem).


>
> Same goes for the regression introduced in patch 2: I think it's
> better to keep things bisectable on all platforms (even if it
> appeared to work by chance on imx7, it did work before this change).

Could you be more specific about your idea to solve this problem?

>
> That's just my opinion, but when you get reviews on a patch series,
> it's better to address them directly (especially when issues can be
> easily fixed) than provide follow-up patches.

I do not have iMX7 for testing/development, so I could not reproduce
the error and address the issue directly.

I can at best integrate Stefan's patch and hope to not introduce
regression.



Best regards,
Łukasz Majewski

>
> Regards,
>
> Boris

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-12-29 17:56    [W:0.271 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site