lkml.org 
[lkml]   [2016]   [Dec]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 2/3] dmaeninge: xilinx_dma: Fix bug in multiple frame stores scenario in vdma
From
Date
Hi Kedar,


On 23-12-2016 08:52, Kedareswara rao Appana wrote:
> When VDMA is configured for more than one frame in the h/w
> for example h/w is configured for n number of frames and user
> Submits n number of frames and triggered the DMA using issue_pending API.
> In the current driver flow we are submitting one frame at a time
> but we should submit all the n number of frames at one time as the h/w
> Is configured for n number of frames.
>
> This patch fixes this issue.
>
> Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
> ---
> Changes for v2:
> ---> Fixed race conditions in the driver as suggested by Jose Abreu
> ---> Fixed unnecessray if else checks in the vdma_start_transfer
> as suggested by Laurent Pinchart.
>
> drivers/dma/xilinx/xilinx_dma.c | 54 +++++++++++++++++++++++------------------
> 1 file changed, 31 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index be7eb41..cf9edd8 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -1052,25 +1052,38 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->has_sg) {
> dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
> tail_segment->phys);
> + list_splice_tail_init(&chan->pending_list, &chan->active_list);
> + chan->desc_pendingcount = 0;
> } else {
> struct xilinx_vdma_tx_segment *segment, *last = NULL;
> - int i = 0;
> + int i = 0, j = 0;
>
> if (chan->desc_submitcount < chan->num_frms)
> i = chan->desc_submitcount;
>
> - list_for_each_entry(segment, &desc->segments, node) {
> - if (chan->ext_addr)
> - vdma_desc_write_64(chan,
> - XILINX_VDMA_REG_START_ADDRESS_64(i++),
> - segment->hw.buf_addr,
> - segment->hw.buf_addr_msb);
> - else
> - vdma_desc_write(chan,
> - XILINX_VDMA_REG_START_ADDRESS(i++),
> - segment->hw.buf_addr);
> -
> - last = segment;
> + for (j = 0; j < chan->num_frms; ) {
> + list_for_each_entry(segment, &desc->segments, node) {
> + if (chan->ext_addr)
> + vdma_desc_write_64(chan,
> + XILINX_VDMA_REG_START_ADDRESS_64(i++),
> + segment->hw.buf_addr,
> + segment->hw.buf_addr_msb);
> + else
> + vdma_desc_write(chan,
> + XILINX_VDMA_REG_START_ADDRESS(i++),
> + segment->hw.buf_addr);
> +
> + last = segment;
> + }
> + list_del(&desc->node);
> + list_add_tail(&desc->node, &chan->active_list);
> + j++;
> + if (list_empty(&chan->pending_list) ||
> + (i == chan->num_frms))
> + break;
> + desc = list_first_entry(&chan->pending_list,
> + struct xilinx_dma_tx_descriptor,
> + node);
> }
>
> if (!last)
> @@ -1081,20 +1094,14 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
> last->hw.stride);
> vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);

What if we reach here and j < num_frms? It can happen because if
the pending list is empty the loop breaks. Then VDMA will start
with framebuffers having address 0x0. You should only program
vsize when j > num_frms or when we have already previously set
the framebuffers (i.e. when submitcount has already been
incremented num_frms at least once).

Best regards,
Jose Miguel Abreu

> - }
>
> - chan->idle = false;
> - if (!chan->has_sg) {
> - list_del(&desc->node);
> - list_add_tail(&desc->node, &chan->active_list);
> - chan->desc_submitcount++;
> - chan->desc_pendingcount--;
> + chan->desc_submitcount += j;
> + chan->desc_pendingcount -= j;
> if (chan->desc_submitcount == chan->num_frms)
> chan->desc_submitcount = 0;
> - } else {
> - list_splice_tail_init(&chan->pending_list, &chan->active_list);
> - chan->desc_pendingcount = 0;
> }
> +
> + chan->idle = false;
> }
>
> /**
> @@ -1342,6 +1349,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
>
> chan->err = false;
> chan->idle = true;
> + chan->desc_submitcount = 0;
>
> return err;
> }

\
 
 \ /
  Last update: 2016-12-23 16:39    [W:0.069 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site