lkml.org 
[lkml]   [2016]   [Dec]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/12] crypto: atmel-sha: add atmel_sha_cpu_start()
Date
This patch adds a simple function to perform data transfer with PIO, hence
handled by the CPU.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
---
drivers/crypto/atmel-sha.c | 90 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)

diff --git a/drivers/crypto/atmel-sha.c b/drivers/crypto/atmel-sha.c
index be0d72cf4352..58d9ca8ac0f2 100644
--- a/drivers/crypto/atmel-sha.c
+++ b/drivers/crypto/atmel-sha.c
@@ -64,6 +64,8 @@
#define SHA_FLAGS_ERROR BIT(23)
#define SHA_FLAGS_PAD BIT(24)
#define SHA_FLAGS_RESTORE BIT(25)
+#define SHA_FLAGS_IDATAR0 BIT(26)
+#define SHA_FLAGS_WAIT_DATARDY BIT(27)

#define SHA_OP_UPDATE 1
#define SHA_OP_FINAL 2
@@ -141,6 +143,7 @@ struct atmel_sha_dev {
struct ahash_request *req;
bool is_async;
atmel_sha_fn_t resume;
+ atmel_sha_fn_t cpu_transfer_complete;

struct atmel_sha_dma dma_lch_in;

@@ -1317,6 +1320,93 @@ static irqreturn_t atmel_sha_irq(int irq, void *dev_id)
return IRQ_NONE;
}

+
+/* CPU transfer functions */
+
+static int atmel_sha_cpu_transfer(struct atmel_sha_dev *dd)
+{
+ struct ahash_request *req = dd->req;
+ struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
+ const u32 *words = (const u32 *)ctx->buffer;
+ size_t i, num_words;
+ u32 isr, din, din_inc;
+
+ din_inc = (ctx->flags & SHA_FLAGS_IDATAR0) ? 0 : 1;
+ for (;;) {
+ /* Write data into the Input Data Registers. */
+ num_words = DIV_ROUND_UP(ctx->bufcnt, sizeof(u32));
+ for (i = 0, din = 0; i < num_words; ++i, din += din_inc)
+ atmel_sha_write(dd, SHA_REG_DIN(din), words[i]);
+
+ ctx->offset += ctx->bufcnt;
+ ctx->total -= ctx->bufcnt;
+
+ if (!ctx->total)
+ break;
+
+ /*
+ * Prepare next block:
+ * Fill ctx->buffer now with the next data to be written into
+ * IDATARx: it gives time for the SHA hardware to process
+ * the current data so the SHA_INT_DATARDY flag might be set
+ * in SHA_ISR when polling this register at the beginning of
+ * the next loop.
+ */
+ ctx->bufcnt = min_t(size_t, ctx->block_size, ctx->total);
+ scatterwalk_map_and_copy(ctx->buffer, ctx->sg,
+ ctx->offset, ctx->bufcnt, 0);
+
+ /* Wait for hardware to be ready again. */
+ isr = atmel_sha_read(dd, SHA_ISR);
+ if (!(isr & SHA_INT_DATARDY)) {
+ /* Not ready yet. */
+ dd->resume = atmel_sha_cpu_transfer;
+ atmel_sha_write(dd, SHA_IER, SHA_INT_DATARDY);
+ return -EINPROGRESS;
+ }
+ }
+
+ if (unlikely(!(ctx->flags & SHA_FLAGS_WAIT_DATARDY)))
+ return dd->cpu_transfer_complete(dd);
+
+ return atmel_sha_wait_for_data_ready(dd, dd->cpu_transfer_complete);
+}
+
+static int atmel_sha_cpu_start(struct atmel_sha_dev *dd,
+ struct scatterlist *sg,
+ unsigned int len,
+ bool idatar0_only,
+ bool wait_data_ready,
+ atmel_sha_fn_t resume)
+{
+ struct ahash_request *req = dd->req;
+ struct atmel_sha_reqctx *ctx = ahash_request_ctx(req);
+
+ if (!len)
+ return resume(dd);
+
+ ctx->flags &= ~(SHA_FLAGS_IDATAR0 | SHA_FLAGS_WAIT_DATARDY);
+
+ if (idatar0_only)
+ ctx->flags |= SHA_FLAGS_IDATAR0;
+
+ if (wait_data_ready)
+ ctx->flags |= SHA_FLAGS_WAIT_DATARDY;
+
+ ctx->sg = sg;
+ ctx->total = len;
+ ctx->offset = 0;
+
+ /* Prepare the first block to be written. */
+ ctx->bufcnt = min_t(size_t, ctx->block_size, ctx->total);
+ scatterwalk_map_and_copy(ctx->buffer, ctx->sg,
+ ctx->offset, ctx->bufcnt, 0);
+
+ dd->cpu_transfer_complete = resume;
+ return atmel_sha_cpu_transfer(dd);
+}
+
+
static void atmel_sha_unregister_algs(struct atmel_sha_dev *dd)
{
int i;
--
2.7.4
\
 
 \ /
  Last update: 2016-12-22 17:39    [W:0.054 / U:9.976 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site