lkml.org 
[lkml]   [2016]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/6] powerpc/powernv: Autoload IMC device driver module
Date
This patch does three things :
- Enables "opal.c" to create a platform device for the IMC interface
according to the appropriate compatibility string.
- Find the reserved-memory region details from the system device tree
and get the base address of HOMER region address for each chip.
- We also get the Nest PMU counter data offsets (in the HOMER region)
and their sizes. The offsets for the counters' data are fixed and
won't change from chip to chip.

The device tree parsing logic is separated from the PMU creation
functions (which is done in subsequent patches). Right now, only Nest
units are taken care of.

Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Stewart Smith <stewart@linux.vnet.ibm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com>
---
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/opal-imc.c | 117 ++++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/opal.c | 13 ++++
3 files changed, 131 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/platforms/powernv/opal-imc.c

diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index b5d98cb..44909fe 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -2,7 +2,7 @@ obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
-obj-y += opal-kmsg.o
+obj-y += opal-kmsg.o opal-imc.o

obj-$(CONFIG_SMP) += smp.o subcore.o subcore-asm.o
obj-$(CONFIG_PCI) += pci.o pci-ioda.o npu-dma.o
diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
new file mode 100644
index 0000000..ee2ae45
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -0,0 +1,117 @@
+/*
+ * OPAL IMC interface detection driver
+ * Supported on POWERNV platform
+ *
+ * Copyright (C) 2016 Madhavan Srinivasan, IBM Corporation.
+ * (C) 2016 Hemant K Shaw, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/poll.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <asm/opal.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/cputable.h>
+#include <asm/imc-pmu.h>
+
+struct perchip_nest_info nest_perchip_info[IMC_MAX_CHIPS];
+
+static int opal_imc_counters_probe(struct platform_device *pdev)
+{
+ struct device_node *child, *imc_dev, *rm_node = NULL;
+ struct perchip_nest_info *pcni;
+ u32 reg[4], pages, nest_offset, nest_size, idx;
+ int i = 0;
+ const char *node_name;
+
+ if (!pdev || !pdev->dev.of_node)
+ return -ENODEV;
+
+ imc_dev = pdev->dev.of_node;
+
+ /*
+ * nest_offset : where the nest-counters' data start.
+ * size : size of the entire nest-counters region
+ */
+ if (of_property_read_u32(imc_dev, "imc-nest-offset", &nest_offset))
+ goto err;
+ if (of_property_read_u32(imc_dev, "imc-nest-size", &nest_size))
+ goto err;
+
+ /* Find the "homer region" for each chip */
+ rm_node = of_find_node_by_path("/reserved-memory");
+ if (!rm_node)
+ goto err;
+
+ for_each_child_of_node(rm_node, child) {
+ if (of_property_read_string_index(child, "name", 0,
+ &node_name))
+ continue;
+ if (strncmp("ibm,homer-image", node_name,
+ strlen("ibm,homer-image")))
+ continue;
+
+ /* Get the chip id to which the above homer region belongs to */
+ if (of_property_read_u32(child, "ibm,chip-id", &idx))
+ goto err;
+
+ /* reg property will have four u32 cells. */
+ if (of_property_read_u32_array(child, "reg", reg, 4))
+ goto err;
+
+ pcni = &nest_perchip_info[idx];
+
+ /* Fetch the homer region base address */
+ pcni->pbase = reg[0];
+ pcni->pbase = pcni->pbase << 32 | reg[1];
+ /* Add the nest IMC Base offset */
+ pcni->pbase = pcni->pbase + nest_offset;
+ /* Fetch the size of the homer region */
+ pcni->size = nest_size;
+
+ do {
+ pages = PAGE_SIZE * i;
+ pcni->vbase[i++] = (u64)phys_to_virt(pcni->pbase +
+ pages);
+ } while (i < (pcni->size / PAGE_SIZE));
+ }
+
+ return 0;
+err:
+ return -ENODEV;
+}
+
+static const struct of_device_id opal_imc_match[] = {
+ { .compatible = IMC_DTB_COMPAT },
+ {},
+};
+
+static struct platform_driver opal_imc_driver = {
+ .driver = {
+ .name = "opal-imc-counters",
+ .of_match_table = opal_imc_match,
+ },
+ .probe = opal_imc_counters_probe,
+};
+
+MODULE_DEVICE_TABLE(of, opal_imc_match);
+module_platform_driver(opal_imc_driver);
+MODULE_DESCRIPTION("PowerNV OPAL IMC driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c
index 6c9a65b..a0bb336 100644
--- a/arch/powerpc/platforms/powernv/opal.c
+++ b/arch/powerpc/platforms/powernv/opal.c
@@ -30,6 +30,7 @@
#include <asm/opal.h>
#include <asm/firmware.h>
#include <asm/mce.h>
+#include <asm/imc-pmu.h>

#include "powernv.h"

@@ -650,6 +651,15 @@ static void opal_i2c_create_devs(void)
of_platform_device_create(np, NULL, NULL);
}

+static void opal_imc_init_dev(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, IMC_DTB_COMPAT);
+ if (np)
+ of_platform_device_create(np, NULL, NULL);
+}
+
static int kopald(void *unused)
{
unsigned long timeout = msecs_to_jiffies(opal_heartbeat) + 1;
@@ -723,6 +733,9 @@ static int __init opal_init(void)
/* Setup a heatbeat thread if requested by OPAL */
opal_init_heartbeat();

+ /* Detect IMC pmu counters support and create PMUs */
+ opal_imc_init_dev();
+
/* Create leds platform devices */
leds = of_find_node_by_path("/ibm,opal/leds");
if (leds) {
--
2.7.4
\
 
 \ /
  Last update: 2016-12-20 07:41    [W:0.064 / U:1.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site