lkml.org 
[lkml]   [2016]   [Dec]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/7] net: ethernet: ti: cpdma: fix desc re-queuing
On Fri, Dec 02, 2016 at 10:45:07AM -0600, Grygorii Strashko wrote:
>
>
> On 12/02/2016 05:03 AM, Ivan Khoronzhuk wrote:
> > On Thu, Dec 01, 2016 at 05:34:27PM -0600, Grygorii Strashko wrote:
> >> The currently processing cpdma descriptor with EOQ flag set may
> >> contain two values in Next Descriptor Pointer field:
> >> - valid pointer: means CPDMA missed addition of new desc in queue;
> > It shouldn't happen in normal circumstances, right?
>
> it might happen, because desc push compete with desc pop.
> You can check stats values:
> chan->stats.misqueued
> chan->stats.requeue
> under different types of net-loads.
I've done this, of-course.
By whole logic the misqueued counter has to cover all cases.
But that's not true.

>
> TRM:
> "
> If the pNext pointer is initially NULL, and more packets need to be queued for transmit, the software
> application may alter this pointer to point to a newly appended descriptor. The EMAC will use the new
> pointer value and proceed to the next descriptor unless the pNext value has already been read. In this
> latter case, the transmitter will halt on the transmit channel in question, and the software application may
> restart it at that time. The software can detect this case by checking for an end of queue (EOQ) condition
> flag on the updated packet descriptor when it is returned by the EMAC.
> "
That's true. No issues in desc.
In the code no any place to update next_desc except submit function.

And this case is supposed to be caught here:
For submit:
cpdma_chan_submit()
spin_lock_irqsave(&chan->lock);
...
--->__cpdma_chan_submit()
...
------> desc_write(prev, hw_next, desc_dma); // here next pointer is updated, it can be not in time
...
------> mode = desc_read(prev, hw_mode); // pay attention, it's read after updating next pointer
------> if ((mode & CPDMA_DESC_EOQ) &&
------> (chan->state == CPDMA_STATE_ACTIVE)) { // here checked if it was late update
---------> chan_write(chan, hdp, desc_dma); // here transmit is restarted, if needed

For process it only caught the fact of late update, but it has to be caught in
submit() already:
__cpdma_chan_process()
spin_lock_irqsave(&chan->lock);
------> if (mode & CPDMA_DESC_EOQ) // here transmit is restarted, if needed
---------> chan_write(chan, hdp, desc_dma); // but w/o updating next pointer

Seems there is no place where hw_next is updated w/o updating hdp :-| in case
of late hw_next set. And that is strange. I know it happens, I've checked it
before of-course. Then I thought, maybe there is some problem with write order,
thus out of sync, nothing more.

>
>
> > So, why it happens only for egress channels? And Does that mean
> > there is some resynchronization between submit and process function,
> > or this is h/w issue?
>
> no hw issues. this patch just removes one unnecessary I/O access
No objections against patch. Anyway it's better then before.
Just want to know the real reason why it happens, maybe there is smth else.

>
> >
> >> - null: no more descriptors in queue.
> >> In the later case, it's not required to write to HDP register, but now
> >> CPDMA does it.
> >>
> >> Hence, add additional check for Next Descriptor Pointer != null in
> >> cpdma_chan_process() function before writing in HDP register.
> >>
> >> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
> >> ---
> >> drivers/net/ethernet/ti/davinci_cpdma.c | 2 +-
> >> 1 file changed, 1 insertion(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
> >> index 0924014..379314f 100644
> >> --- a/drivers/net/ethernet/ti/davinci_cpdma.c
> >> +++ b/drivers/net/ethernet/ti/davinci_cpdma.c
> >> @@ -1152,7 +1152,7 @@ static int __cpdma_chan_process(struct cpdma_chan *chan)
> >> chan->count--;
> >> chan->stats.good_dequeue++;
> >>
> >> - if (status & CPDMA_DESC_EOQ) {
> >> + if ((status & CPDMA_DESC_EOQ) && chan->head) {
> >> chan->stats.requeue++;
> >> chan_write(chan, hdp, desc_phys(pool, chan->head));
> >> }
> >> --
> >> 2.10.1
> >>
>
> --
> regards,
> -grygorii

\
 
 \ /
  Last update: 2016-12-03 00:29    [W:0.057 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site