lkml.org 
[lkml]   [2016]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] ARM: dts: sun8i: add opp-v2 table for A33
On Fri, Dec 16, 2016 at 02:27:54AM +0800, Icenowy Zheng wrote:
> An operating point table is needed for the cpu frequency adjusting to
> work.
>
> The operating point table is converted from the common value in
> extracted script.fex from many A33 board/tablets.
>
> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
> ---
> Changes since v1:
> - Fix format problem (blank lines).
> - Removed the 1.344GHz operating point, as it's overvoltage and overclocked.
>
> This patch depends on the following patchset:
>
> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-December/473962.html
>
> It's the v2 of the [PATCH 4/6] in this patchset.
>
> I think this operating point table may also apply to A23, as there's no
> difference except the points over 1.2GHz between A23 and A33's stock dvfs table.
>
> But as A23 CCU may not have the necessary fixes, I won't add the table to A23
> now.
>
> Chen-Yu, could you test the CCU fixes I described in the patchset above on A23,
> then test this operating points table?
>
> If it's necessary, you can send out the CCU fixes and add one more patch that
> moves this opp-v2 table to sun8i-a23-a33.dtsi .
>
> arch/arm/boot/dts/sun8i-a33.dtsi | 35 +++++++++++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
> index 504996cbee29..0f5b2af72981 100644
> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
> @@ -46,7 +46,42 @@
> #include <dt-bindings/dma/sun4i-a10.h>
>
> / {
> + cpu0_opp_table: opp_table0 {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp@648000000 {
> + opp-hz = /bits/ 64 <648000000>;
> + opp-microvolt = <1040000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp@816000000 {
> + opp-hz = /bits/ 64 <816000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp@1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <1200000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> +
> + opp@1200000000 {
> + opp-hz = /bits/ 64 <1200000000>;
> + opp-microvolt = <1320000>;
> + clock-latency-ns = <244144>; /* 8 32k periods */
> + };
> + };
> +
> cpus {
> + cpu0: cpu@0 {

There's no need to duplicate the label here. I removed it and applied.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2016-12-19 10:22    [W:0.044 / U:2.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site