lkml.org 
[lkml]   [2016]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] NFC: trf7970a: Add device tree option of 1.8 Volt IO voltage
On Thu, Dec 15, 2016 at 05:30:43PM -0500, Geoff Lansberry wrote:
> From: Geoff Lansberry <geoff@kuvee.com>
>
> ---
> Documentation/devicetree/bindings/net/nfc/trf7970a.txt | 2 ++
> drivers/nfc/trf7970a.c | 13 ++++++++++++-
> 2 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> index 9dda879..208f045 100644
> --- a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> +++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
> @@ -21,6 +21,7 @@ Optional SoC Specific Properties:
> - t5t-rmb-extra-byte-quirk: Specify that the trf7970a has the erratum
> where an extra byte is returned by Read Multiple Block commands issued
> to Type 5 tags.
> +- vdd_io_1v8: Set to specify that the trf7970a io voltage should be set to 1.8V

Use the regulator binding and provide a fixed 1.8V supply.

> - crystal_27mhz: Set to specify that the input frequency to the trf7970a is 27.12MHz
>
>
> @@ -45,6 +46,7 @@ Example (for ARM-based BeagleBone with TRF7970A on SPI1):
> irq-status-read-quirk;
> en2-rf-quirk;
> t5t-rmb-extra-byte-quirk;
> + vdd_io_1v8;
> crystal_27mhz;
> status = "okay";
> };

\
 
 \ /
  Last update: 2016-12-19 23:36    [W:0.088 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site