lkml.org 
[lkml]   [2016]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ARM: dts: sun8i: add opp-v2 table for A33
From
Date
On 19/12/2016 15:06, Icenowy Zheng wrote:
>
>
> 19.12.2016, 16:54, "Chen-Yu Tsai" <wens@csie.org>:
>> On Mon, Dec 19, 2016 at 4:46 PM, Maxime Ripard
>> <maxime.ripard@free-electrons.com> wrote:
>>> On Fri, Dec 16, 2016 at 02:27:54AM +0800, Icenowy Zheng wrote:
>>>> An operating point table is needed for the cpu frequency adjusting to
>>>> work.
>>>>
>>>> The operating point table is converted from the common value in
>>>> extracted script.fex from many A33 board/tablets.
>>>>
>>>> Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
>>>> ---
>>>> Changes since v1:
>>>> - Fix format problem (blank lines).
>>>> - Removed the 1.344GHz operating point, as it's overvoltage and overclocked.
>>>>
>>>> This patch depends on the following patchset:
>>>>
>>>> http://lists.infradead.org/pipermail/linux-arm-kernel/2016-December/473962.html
>>>>
>>>> It's the v2 of the [PATCH 4/6] in this patchset.
>>>>
>>>> I think this operating point table may also apply to A23, as there's no
>>>> difference except the points over 1.2GHz between A23 and A33's stock dvfs table.
>>>>
>>>> But as A23 CCU may not have the necessary fixes, I won't add the table to A23
>>>> now.
>>>>
>>>> Chen-Yu, could you test the CCU fixes I described in the patchset above on A23,
>>>> then test this operating points table?
>>>>
>>>> If it's necessary, you can send out the CCU fixes and add one more patch that
>>>> moves this opp-v2 table to sun8i-a23-a33.dtsi .
>>>>
>>>> arch/arm/boot/dts/sun8i-a33.dtsi | 35 +++++++++++++++++++++++++++++++++++
>>>> 1 file changed, 35 insertions(+)
>>>>
>>>> diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
>>>> index 504996cbee29..0f5b2af72981 100644
>>>> --- a/arch/arm/boot/dts/sun8i-a33.dtsi
>>>> +++ b/arch/arm/boot/dts/sun8i-a33.dtsi
>>>> @@ -46,7 +46,42 @@
>>>> #include <dt-bindings/dma/sun4i-a10.h>
>>>>
>>>> / {
>>>> + cpu0_opp_table: opp_table0 {
>>>> + compatible = "operating-points-v2";
>>>> + opp-shared;
>>>> +
>>>> + opp@648000000 {
>>>> + opp-hz = /bits/ 64 <648000000>;
>>>> + opp-microvolt = <1040000>;
>>>> + clock-latency-ns = <244144>; /* 8 32k periods */
>>>> + };
>>>> +
>>>> + opp@816000000 {
>>>> + opp-hz = /bits/ 64 <816000000>;
>>>> + opp-microvolt = <1100000>;
>>>> + clock-latency-ns = <244144>; /* 8 32k periods */
>>>> + };
>>>> +
>>>> + opp@1008000000 {
>>>> + opp-hz = /bits/ 64 <1008000000>;
>>>> + opp-microvolt = <1200000>;
>>>> + clock-latency-ns = <244144>; /* 8 32k periods */
>>>> + };
>>>> +
>>>> + opp@1200000000 {
>>>> + opp-hz = /bits/ 64 <1200000000>;
>>>> + opp-microvolt = <1320000>;
>>>> + clock-latency-ns = <244144>; /* 8 32k periods */
>>>> + };
>>>> + };
>>>> +

Also, there are a lot more operating points for the A33, see:
https://github.com/QSchulz/linux/blob/v4.9-rc4_adc_a31_v7/cpufreq_a33/arch/arm/boot/dts/sun8i-a33.dtsi#L323-L340

They are present in the Allwinner Linux source code and in the fex of
all A33-based boards.

Is there a reason for not adding all opp?

Quentin

--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-12-19 16:03    [W:0.044 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site