lkml.org 
[lkml]   [2016]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 6/8] extcon: axp288: Use vbus-valid instead of -present to determine cable presence
Hi Hans,

On 2016년 12월 19일 09:13, Hans de Goede wrote:
> The vbus-present bit in the power status register also gets set to 1
> when a usb-host cable (id-pin shorted to ground) is plugged in and a 5v
> boost converter is supplying 5v to the otg usb bus.
>
> This causes a "disconnect or unknown or ID event" warning in dmesg as
> well as the extcon device to report the last detected charger cable
> type as being connected even though none is connected.
>
> This commit switches to checking the vbus-valid bit instead, which is
> only 1 when both vbus is present and the vbus-path is enabled in the
> vbus-path control register (the vbus-path gets disabled when a usb-host
> cable is detected, to avoid the pmic drawing power from the 5v boost
> converter).
>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/extcon/extcon-axp288.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
> index fc636f6..7aec413 100644
> --- a/drivers/extcon/extcon-axp288.c
> +++ b/drivers/extcon/extcon-axp288.c
> @@ -166,7 +166,7 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
> return ret;
> }
>
> - vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT);
> + vbus_attach = (pwr_stat & PS_STAT_VBUS_VALID);
> if (!vbus_attach) {
> dev_info(info->dev, "vbus/cable disconnected\n");
> goto no_vbus;
>

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

--
Regards,
Chanwoo Choi

\
 
 \ /
  Last update: 2016-12-19 07:36    [W:0.075 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site