lkml.org 
[lkml]   [2016]   [Dec]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 04/14] power: supply: axp288_charger: Drop platform_data dependency
Date
When the axp288_charger driver was originally merged, it was merged with
a dependency on some other driver providing platform data for it.

However the battery-data-framework which should provide that data never
got merged, so the axp288_charger as merged upstream has never worked,
its probe method simply always returns -ENODEV.

This commit removes the dependency on the platform_data instead reading
back the charging current and charging voltage that the firmware has set
and using those values as the maximum values the user may set.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/power/supply/axp288_charger.c | 88 ++++++++++++-----------------------
include/linux/mfd/axp20x.h | 7 ---
2 files changed, 30 insertions(+), 65 deletions(-)

diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
index f1e3b0e..76f7d29 100644
--- a/drivers/power/supply/axp288_charger.c
+++ b/drivers/power/supply/axp288_charger.c
@@ -143,7 +143,6 @@ enum {

struct axp288_chrg_info {
struct platform_device *pdev;
- struct axp20x_chrg_pdata *pdata;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
int irq[CHRG_INTR_END];
@@ -769,60 +768,42 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
return ret;
}

- /* Init charging current and voltage */
- info->max_cc = info->pdata->max_cc;
- info->max_cv = info->pdata->max_cv;
-
/* Read current charge voltage and current limit */
ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
if (ret < 0) {
- /* Assume default if cannot read */
- info->cc = info->pdata->def_cc;
- info->cv = info->pdata->def_cv;
- } else {
- /* Determine charge voltage */
- cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
- switch (cv) {
- case CHRG_CCCV_CV_4100MV:
- info->cv = CV_4100MV;
- break;
- case CHRG_CCCV_CV_4150MV:
- info->cv = CV_4150MV;
- break;
- case CHRG_CCCV_CV_4200MV:
- info->cv = CV_4200MV;
- break;
- case CHRG_CCCV_CV_4350MV:
- info->cv = CV_4350MV;
- break;
- default:
- info->cv = INT_MAX;
- break;
- }
-
- /* Determine charge current limit */
- cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
- cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
- info->cc = cc;
+ dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
+ AXP20X_CHRG_CTRL1, ret);
+ return ret;
+ }

- /* Program default charging voltage and current */
- cc = min(info->pdata->def_cc, info->max_cc);
- cv = min(info->pdata->def_cv, info->max_cv);
+ /* Determine charge voltage */
+ cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
+ switch (cv) {
+ case CHRG_CCCV_CV_4100MV:
+ info->cv = CV_4100MV;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->cv = CV_4150MV;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->cv = CV_4200MV;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->cv = CV_4350MV;
+ break;
+ }

- ret = axp288_charger_set_cc(info, cc);
- if (ret < 0) {
- dev_err(&info->pdev->dev,
- "error(%d) in setting CC\n", ret);
- return ret;
- }
+ /* Determine charge current limit */
+ cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+ cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ info->cc = cc;

- ret = axp288_charger_set_cv(info, cv);
- if (ret < 0) {
- dev_err(&info->pdev->dev,
- "error(%d) in setting CV\n", ret);
- return ret;
- }
- }
+ /*
+ * Do not allow the user to configure higher settings then those
+ * set by the firmware
+ */
+ info->max_cv = info->cv;
+ info->max_cc = info->cc;

return 0;
}
@@ -841,15 +822,6 @@ static int axp288_charger_probe(struct platform_device *pdev)
info->pdev = pdev;
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
- info->pdata = pdev->dev.platform_data;
-
- if (!info->pdata) {
- /* Try ACPI provided pdata via device properties */
- if (!device_property_present(&pdev->dev,
- "axp288_charger_data\n"))
- dev_err(&pdev->dev, "failed to get platform data\n");
- return -ENODEV;
- }

info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
if (info->cable.edev == NULL) {
diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 1d07ada..6715df3 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -532,13 +532,6 @@ struct axp20x_dev {
const struct regmap_irq_chip *regmap_irq_chip;
};

-struct axp20x_chrg_pdata {
- int max_cc;
- int max_cv;
- int def_cc;
- int def_cv;
-};
-
struct axp288_extcon_pdata {
/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
struct gpio_desc *gpio_mux_cntl;
--
2.9.3
\
 
 \ /
  Last update: 2016-12-19 01:11    [W:1.012 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site