lkml.org 
[lkml]   [2016]   [Dec]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRe: [PATCH 0/8] device-dax: sub-division support
    Date
    Hi, Dan,

    Dan Williams <dan.j.williams@intel.com> writes:

    > On Tue, Dec 13, 2016 at 3:46 PM, Jeff Moyer <jmoyer@redhat.com> wrote:
    >> Hi, Dan,
    >>
    >> In general, I have a couple of concerns with this patchset:
    >> 1) You're making a case that subdivision shouldn't be persistent, which
    >> means that all of the code we already have for subdividing devices
    >> (partitions, libnvdimm) has to be re-invented in userspace, and
    >> existing tools can't be used to manage nvdimms.
    >
    > Keep in mind that the device-dax core just operates on address ranges,
    > whether those address ranges are persistent or not is invisible to the
    > core. The core simply can not assume that the address ranges it is
    > managing are persistent or volatile. For environments that want to use
    > traditional partitioning or libnvdimm namespace labels, nothing stops
    > them. The difference is just a mode setting at the namespace level,
    > for example:
    >
    > ndctl create-namespace --reconfig=namespace0.0 --mode=dax --force
    > ndctl create-namespace --reconfig=namespace0.0 --mode=memory --force
    >
    > Also recall that we have namespace sub-division support, with
    > persistent labels, that was added in 4.9. So instead of being limited
    > to one namespace per pmem-region we can now support multiple
    > namespaces per region.

    Namespace subdivision requires label support in the NVDIMM, and given
    that there are no NVDIMMs out there today that support labels, that's
    not an option.

    It makes a heck of a lot more sense to continue to manage storage via a
    block device. I know that DAX support for block devices ran into
    roadblocks before, but I'm willing to give it another try. You
    mentioned on irc that we may be able to emulate label support for
    DIMMs that don't have it. I guess that would be another way forward.
    Did you have any ideas on how that might be implemented?

    >> 2) You're pushing file system features into a character device.
    >
    > Yes, just like a block device the device-dax instances support
    > sub-division and a unified inode.

    I'm not sure what you mean by a unified inode.

    > But, unlike a block device, no entanglements with the page cache or
    > other higher level file api features.

    >> OK, so you've now implemented file extending and truncation (and block
    >> mapping, I guess). Where does this end? How many more file-system
    >> features will you add to this character device?
    >>
    >
    > It ends here. A device-file per sub-allocation of a memory range is
    > the bare minimum to take device-dax from being a toy to something
    > usable in practice. Device-DAX will never support read(2)/write(2),
    > never support MAP_PRIVATE, and being DAX it will never interact with
    > the page cache which eliminates most of the rest of the file apis. It
    > will also never support higher order mm capabilities like overcommit
    > and migration.

    Well, Dave Jiang posted patches to add fallocate support. So it didn't
    quite end there.

    >>> * allocation + access mechanism for performance differentiated memory:
    >>> Persistent memory is one example of a reserved memory pool with
    >>> different performance characteristics than typical DRAM in a system,
    >>> and there are examples of other performance differentiated memory
    >>> pools (high bandwidth or low latency) showing up on commonly available
    >>> platforms. This mechanism gives purpose built applications (high
    >>> performance computing, databases, etc...) a way to establish mappings
    >>> with predictable fault-granularities and performance, but also allow
    >>> for different permissions per allocation.
    >>
    >> So, how would an application that wishes to use a device-dax subdivision
    >> of performance differentiated memory get access to it?
    >> 1) administrator subdivides space and assigns it to a user
    >> 2) application gets to use it
    >>
    >> Something like that? Or do you expect applications to sub-divide the
    >> device-dax instance programmatically?
    >
    > No, not programmatically, I would expect this would be a provisioning
    > time setup operation when the server/service is instantiated.

    That's a terrible model for storage. If you're going to continue on
    this path, then I'd suggest that the moment the namespace is converted
    to be "device dax", the initial device should have a size of 0. At
    least that way nobody can accidentally open it and scribble all over
    the full device.

    >> Why wouldn't you want the mapping to live beyond a single boot?
    >
    > This goes back to not being able to assume that the media is
    > persistent. If an application/use case needs the kernel to recall
    > provisioning decisions then that application needs to stick to
    > libnvdimm namespace labels, block device partitions, or a filesystem.

    You can't have it both ways. Either device-dax is meant for persistent
    memory or it isn't. You're stating that the right way to divide up a
    persistent memory namespace is to use labels, which don't exist. Then
    you're proposing this method for dividing up device-dax as well, without
    anybody from the non-persistent memory camp even chiming in that this is
    something that they want. What is the urgency here, and where are the
    users?

    I can only conclude that you actually do intend the subdivision to be
    used for persistent memory, and I'm telling you that what you've
    implemented doesn't fit that use case well at all.

    >>> * carving up a PCI-E device memory bar for managing peer-to-peer
    >>> transactions: In the thread about enablling P2P DMA one of the
    >>> concerns that was raised was security separation of different users of
    >>> a device: http://marc.info/?l=linux-kernel&m=148106083913173&w=2
    >>
    >> OK, but I wasn't sure that there was consensus in that thread. It
    >> seemed more likely that the block device ioctl path would be pursued.
    >> If this is the preferred method, I think you should document their
    >> requirements and show how the implementation meets them, instead of
    >> leaving that up to reviewers. Or, at the very least, CC the interested
    >> parties?
    >
    > I put those details here [1]. That thread did try to gather
    > requirements, but got muddled between graphics, mm, and RDMA concerns.
    > Device-dax is not attempting to solve problems outside of its core use
    > of allowing an application to statically allocate reserved memory. If
    > it works by accident for a P2P RDMA use case, great, but to your
    > earlier concern we're not going to chase that use case with ever more
    > device-dax features.
    >
    > [1]: http://marc.info/?l=linux-kernel&m=147983832620658&w=2

    That's a pretty thin proposal. I'd much rather see the rest of the
    supporting code implemented as a proof of concept before we start taking
    interfaces into the kernel. If your only justification is to use this
    with persistent memory, then I'm telling you I think it's a bad
    interface.

    >>>>> For persistent allocations, naming, and permissions automatically
    >>>>> recalled by the kernel, use filesystem-DAX. For a userspace helper
    >>>>
    >>>> I'd agree with that guidance if it wasn't for the fact that device dax
    >>>> was born out of the need to be able to flush dirty data in a safe manner
    >>>> from userspace. At best, we're giving mixed guidance to application
    >>>> developers.
    >>>
    >>> Yes, but at the same time device-DAX is sufficiently painful (no
    >>> read(2)/write(2) support, no builtin metadata support) that it may
    >>> spur application developers to lobby for a filesystem that offers
    >>> userspace dirty-data flushing. Until then we have this vehicle to test
    >>> the difference and dax-support for memory types beyond persistent
    >>> memory.
    >>
    >> Let's just work on the PMEM_IMMUTABLE flag that Dave suggested[1] and
    >> make device dax just for volatile memories.
    >
    > Yes, let's work on PMEM_IMMUTABLE, and in the meantime we have
    > device-dax. It's not a zero sum situation.
    >
    > Device-dax handles physical memory ranges generically, if you want to
    > "make device dax just for volatile memories", that's a user decision
    > to not give persistent memory ranges to device-dax.

    Right now, your only use case is persistent memory, and I don't think
    this is the right interface for it. Clearly someone is asking for this
    support. Can you convince them to chime in on the mailing list with
    their requirements? Alternatively, can you state what the requirements
    were that lead to this solution?

    Thanks,
    Jeff

    \
     
     \ /
      Last update: 2016-12-15 17:51    [W:3.899 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site