lkml.org 
[lkml]   [2016]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] MIPS: NI 169445 board support
On Wed, Dec 14, 2016 at 10:32 AM, Nathan Sullivan
<nathan.sullivan@ni.com> wrote:
> On Fri, Dec 09, 2016 at 03:18:28PM -0600, Rob Herring wrote:
>> On Fri, Dec 02, 2016 at 09:42:09AM -0600, Nathan Sullivan wrote:
>> > Support the National Instruments 169445 board.
>> >
>> > Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
>> > ---
>> > "gpio: mmio: add support for NI 169445 NAND GPIO" and
>> > "devicetree: add vendor prefix for National Instruments" are required for the
>> > NAND on this board to work.

>> > + ahb@0 {
>> > + compatible = "simple-bus";
>> > + #address-cells = <1>;
>> > + #size-cells = <1>;
>> > + ranges;
>>
>> If everything is under 0x1f3xxxxx, then add in the ranges here (and the
>> unit address).
>>
>
> I noticed that some systems call out their axi/ahb busses, some do not. Would
> you prefer that I remove the bus entirely?

Definitely not. IMO, not having a bus node is an error.

Rob

\
 
 \ /
  Last update: 2016-12-14 17:49    [W:0.046 / U:1.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site