lkml.org 
[lkml]   [2016]   [Dec]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH V5] i2c: designware: fix wrong Tx/Rx FIFO for ACPI
From
Date
On 12/14/2016 11:23 AM, Tin Huynh wrote:
> ACPI always sets Tx/Rx FIFO to 32. This configuration will
> cause problem if the IP core supports a FIFO size of less than 32.
> The driver should read the FIFO size from the IP and select the smaller
> one of the two.
>
> Signed-off-by: Tin Huynh <tnhuynh@apm.com>
>
> ---
> drivers/i2c/busses/i2c-designware-platdrv.c | 31 ++++++++++++++++++++------
> 1 files changed, 24 insertions(+), 7 deletions(-)

Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

\
 
 \ /
  Last update: 2016-12-14 12:21    [W:0.111 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site