lkml.org 
[lkml]   [2016]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/9] NTB: Make link-state API being declared first
Date
Since link operations are usually performed before memory window access
operations, it's logically better to declare link-related API before any
of MW/Doorbell/Scratchpad methods.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
include/linux/ntb.h | 137 ++++++++++++++++++++++++++--------------------------
1 file changed, 69 insertions(+), 68 deletions(-)

diff --git a/include/linux/ntb.h b/include/linux/ntb.h
index 6f47562..5d1f260 100644
--- a/include/linux/ntb.h
+++ b/include/linux/ntb.h
@@ -179,13 +179,13 @@ static inline int ntb_ctx_ops_is_valid(const struct ntb_ctx_ops *ops)

/**
* struct ntb_ctx_ops - ntb device operations
+ * @link_is_up: See ntb_link_is_up().
+ * @link_enable: See ntb_link_enable().
+ * @link_disable: See ntb_link_disable().
* @mw_count: See ntb_mw_count().
* @mw_get_range: See ntb_mw_get_range().
* @mw_set_trans: See ntb_mw_set_trans().
* @mw_clear_trans: See ntb_mw_clear_trans().
- * @link_is_up: See ntb_link_is_up().
- * @link_enable: See ntb_link_enable().
- * @link_disable: See ntb_link_disable().
* @db_is_unsafe: See ntb_db_is_unsafe().
* @db_valid_mask: See ntb_db_valid_mask().
* @db_vector_count: See ntb_db_vector_count().
@@ -212,6 +212,12 @@ static inline int ntb_ctx_ops_is_valid(const struct ntb_ctx_ops *ops)
* @peer_spad_write: See ntb_peer_spad_write().
*/
struct ntb_dev_ops {
+ int (*link_is_up)(struct ntb_dev *ntb,
+ enum ntb_speed *speed, enum ntb_width *width);
+ int (*link_enable)(struct ntb_dev *ntb,
+ enum ntb_speed max_speed, enum ntb_width max_width);
+ int (*link_disable)(struct ntb_dev *ntb);
+
int (*mw_count)(struct ntb_dev *ntb);
int (*mw_get_range)(struct ntb_dev *ntb, int idx,
phys_addr_t *base, resource_size_t *size,
@@ -220,12 +226,6 @@ struct ntb_dev_ops {
dma_addr_t addr, resource_size_t size);
int (*mw_clear_trans)(struct ntb_dev *ntb, int idx);

- int (*link_is_up)(struct ntb_dev *ntb,
- enum ntb_speed *speed, enum ntb_width *width);
- int (*link_enable)(struct ntb_dev *ntb,
- enum ntb_speed max_speed, enum ntb_width max_width);
- int (*link_disable)(struct ntb_dev *ntb);
-
int (*db_is_unsafe)(struct ntb_dev *ntb);
u64 (*db_valid_mask)(struct ntb_dev *ntb);
int (*db_vector_count)(struct ntb_dev *ntb);
@@ -265,13 +265,14 @@ static inline int ntb_dev_ops_is_valid(const struct ntb_dev_ops *ops)
{
/* commented callbacks are not required: */
return
+ ops->link_is_up &&
+ ops->link_enable &&
+ ops->link_disable &&
ops->mw_count &&
ops->mw_get_range &&
ops->mw_set_trans &&
/* ops->mw_clear_trans && */
- ops->link_is_up &&
- ops->link_enable &&
- ops->link_disable &&
+
/* ops->db_is_unsafe && */
ops->db_valid_mask &&

@@ -441,6 +442,62 @@ void ntb_link_event(struct ntb_dev *ntb);
void ntb_db_event(struct ntb_dev *ntb, int vector);

/**
+ * ntb_link_is_up() - get the current ntb link state
+ * @ntb: NTB device context.
+ * @speed: OUT - The link speed expressed as PCIe generation number.
+ * @width: OUT - The link width expressed as the number of PCIe lanes.
+ *
+ * Get the current state of the ntb link. It is recommended to query the link
+ * state once after every link event. It is safe to query the link state in
+ * the context of the link event callback.
+ *
+ * Return: One if the link is up, zero if the link is down, otherwise a
+ * negative value indicating the error number.
+ */
+static inline int ntb_link_is_up(struct ntb_dev *ntb,
+ enum ntb_speed *speed, enum ntb_width *width)
+{
+ return ntb->ops->link_is_up(ntb, speed, width);
+}
+
+/**
+ * ntb_link_enable() - enable the link on the secondary side of the ntb
+ * @ntb: NTB device context.
+ * @max_speed: The maximum link speed expressed as PCIe generation number.
+ * @max_width: The maximum link width expressed as the number of PCIe lanes.
+ *
+ * Enable the link on the secondary side of the ntb. This can only be done
+ * from the primary side of the ntb in primary or b2b topology. The ntb device
+ * should train the link to its maximum speed and width, or the requested speed
+ * and width, whichever is smaller, if supported.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_link_enable(struct ntb_dev *ntb,
+ enum ntb_speed max_speed,
+ enum ntb_width max_width)
+{
+ return ntb->ops->link_enable(ntb, max_speed, max_width);
+}
+
+/**
+ * ntb_link_disable() - disable the link on the secondary side of the ntb
+ * @ntb: NTB device context.
+ *
+ * Disable the link on the secondary side of the ntb. This can only be
+ * done from the primary side of the ntb in primary or b2b topology. The ntb
+ * device should disable the link. Returning from this call must indicate that
+ * a barrier has passed, though with no more writes may pass in either
+ * direction across the link, except if this call returns an error number.
+ *
+ * Return: Zero on success, otherwise an error number.
+ */
+static inline int ntb_link_disable(struct ntb_dev *ntb)
+{
+ return ntb->ops->link_disable(ntb);
+}
+
+/**
* ntb_mw_count() - get the number of memory windows
* @ntb: NTB device context.
*
@@ -517,62 +574,6 @@ static inline int ntb_mw_clear_trans(struct ntb_dev *ntb, int idx)
}

/**
- * ntb_link_is_up() - get the current ntb link state
- * @ntb: NTB device context.
- * @speed: OUT - The link speed expressed as PCIe generation number.
- * @width: OUT - The link width expressed as the number of PCIe lanes.
- *
- * Get the current state of the ntb link. It is recommended to query the link
- * state once after every link event. It is safe to query the link state in
- * the context of the link event callback.
- *
- * Return: One if the link is up, zero if the link is down, otherwise a
- * negative value indicating the error number.
- */
-static inline int ntb_link_is_up(struct ntb_dev *ntb,
- enum ntb_speed *speed, enum ntb_width *width)
-{
- return ntb->ops->link_is_up(ntb, speed, width);
-}
-
-/**
- * ntb_link_enable() - enable the link on the secondary side of the ntb
- * @ntb: NTB device context.
- * @max_speed: The maximum link speed expressed as PCIe generation number.
- * @max_width: The maximum link width expressed as the number of PCIe lanes.
- *
- * Enable the link on the secondary side of the ntb. This can only be done
- * from the primary side of the ntb in primary or b2b topology. The ntb device
- * should train the link to its maximum speed and width, or the requested speed
- * and width, whichever is smaller, if supported.
- *
- * Return: Zero on success, otherwise an error number.
- */
-static inline int ntb_link_enable(struct ntb_dev *ntb,
- enum ntb_speed max_speed,
- enum ntb_width max_width)
-{
- return ntb->ops->link_enable(ntb, max_speed, max_width);
-}
-
-/**
- * ntb_link_disable() - disable the link on the secondary side of the ntb
- * @ntb: NTB device context.
- *
- * Disable the link on the secondary side of the ntb. This can only be
- * done from the primary side of the ntb in primary or b2b topology. The ntb
- * device should disable the link. Returning from this call must indicate that
- * a barrier has passed, though with no more writes may pass in either
- * direction across the link, except if this call returns an error number.
- *
- * Return: Zero on success, otherwise an error number.
- */
-static inline int ntb_link_disable(struct ntb_dev *ntb)
-{
- return ntb->ops->link_disable(ntb);
-}
-
-/**
* ntb_db_is_unsafe() - check if it is safe to use hardware doorbell
* @ntb: NTB device context.
*
--
2.6.6
\
 
 \ /
  Last update: 2016-12-14 00:51    [W:0.244 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site