lkml.org 
[lkml]   [2016]   [Dec]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/2] eeprom: Add IDT 89HPESx driver bindings file
Date
IDT 89HPESx PCIe-switches exposes SMBus interface to have an access to
the device CSRs and EEPROM. So to properly utilize the interface
functionality, developer should declare a valid dts-file node, which
would refer to the corresponding 89HPESx device.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---
.../devicetree/bindings/misc/idt_89hpesx.txt | 44 ++++++++++++++++++++++
1 file changed, 44 insertions(+)
create mode 100644 Documentation/devicetree/bindings/misc/idt_89hpesx.txt

diff --git a/Documentation/devicetree/bindings/misc/idt_89hpesx.txt b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt
new file mode 100644
index 0000000..b9093b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/idt_89hpesx.txt
@@ -0,0 +1,44 @@
+EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices
+
+Required properties:
+ - compatible : should be "<manufacturer>,<type>"
+ Basically there is only one manufacturer: idt, but some
+ compatible devices may be produced in future. Following devices
+ are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2,
+ 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2,
+ 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2;
+ 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a;
+ 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2,
+ 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2,
+ 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2,
+ 89hpes64h16ag2;
+ 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2,
+ 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5,
+ 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2,
+ 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2,
+ 89hpes48t12, 89hpes48t12g2.
+ - reg : I2C address of the IDT 89HPESx device.
+
+Optionally there can be EEPROM-compatible subnode:
+ - compatible: There are five EEPROM devices supported: 24c32, 24c64, 24c128,
+ 24c256 and 24c512 differed by size.
+ - reg: Custom address of EEPROM device (If not specified IDT 89HPESx
+ (optional) device will try to communicate with EEPROM sited by default
+ address - 0x50)
+ - read-only : Parameterless property disables writes to the EEPROM
+ (optional)
+
+Example:
+ idt@60 {
+ compatible = "idt,89hpes32nt8ag2";
+ reg = <0x74>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@50 {
+ compatible = "onsemi,24c64";
+ reg = <0x50>;
+ read-only;
+ };
+ };
+
--
2.6.6
\
 
 \ /
  Last update: 2016-12-13 15:23    [W:0.199 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site