lkml.org 
[lkml]   [2016]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 00/11] add support for VBUS max current and min voltage limits AXP20X and AXP22X PMICs
From
Date
Hi all,

I forgot to add a question to my cover letter so here it is:

The X-Powers AXP209 and AXP223 PMICs allow to not limit the maximal
current for the VBUS power supply.[1]
(If a Chinese-speaking person could check it's the same for the AXP221
that would be great also[2]).

In the get_property (axp20x_usb_power_get_property) of the power supply
driver, I see that we use -1 as value for "no limit". Should we use the
same (-1) value for the set_property (axp20x_usb_power_set_property) to
disable max current limit?

[1] http://dl.linux-sunxi.org/AXP/AXP209_Datasheet_v1.0en.pdf page 33,
REG 30H, BITS 0 & 1
[2]
http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
page 33, REG 30H, BITS 0 & 1 => 不限流 is written for when the BIT(1) is
set.

Thanks,
Quentin

On 09/12/2016 12:04, Quentin Schulz wrote:
> The X-Powers AXP209 and AXP20X PMICs are able to set a limit for the
> VBUS power supply for both max current and min voltage supplied. This
> series of patch adds the possibility to set these limits from sysfs.
>
> Also, the AXP223 PMIC shares most of its behaviour with the AXP221 but
> the former can set the VBUS power supply max current to 100mA, unlike
> the latter. The AXP223 VBUS power supply driver used to probe on the
> AXP221 compatible. This series of patch introduces a new compatible for
> the AXP223 to be able to set the current max limit to 100mA.
>
> With that new compatible, boards having the AXP223 see their DT updated
> to use the VBUS power supply driver with the correct compatible.
>
> This series of patch also migrates from of_device_is_compatible function
> to the data field of of_device_id to identify the compatible used to
> probe. This improves the code readability.
>
> Mostly cosmetic changes in v2 and adding volatile and writeable regs to
> AXP20X and AXP22X MFD cells for the VBUS power supply driver.
>
> Quentin Schulz (11):
> power: supply: axp20x_usb_power: use of_device_id data field instead
> of device_is_compatible
> mfd: axp20x: add volatile and writeable reg ranges for VBUS power
> supply driver
> power: supply: axp20x_usb_power: set min voltage and max current from
> sysfs
> Documentation: DT: binding: axp20x_usb_power: add axp223 compatible
> power: supply: axp20x_usb_power: add 100mA max current limit for
> AXP223
> mfd: axp20x: add separate MFD cell for AXP223
> ARM: dtsi: add DTSI for AXP223
> ARM: dts: sun8i-a33-olinuxino: use AXP223 DTSI
> ARM: dts: sun8i-a33-sinlinx-sina33: use AXP223 DTSI
> ARM: dts: sun8i-r16-parrot: use AXP223 DTSI
> ARM: dtsi: sun8i-reference-design-tablet: use AXP223 DTSI
>
> .../bindings/power/supply/axp20x_usb_power.txt | 5 +
> arch/arm/boot/dts/axp223.dtsi | 58 +++++++++++
> arch/arm/boot/dts/sun8i-a33-olinuxino.dts | 2 +-
> arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 2 +-
> arch/arm/boot/dts/sun8i-r16-parrot.dts | 2 +-
> .../boot/dts/sun8i-reference-design-tablet.dtsi | 2 +-
> drivers/mfd/axp20x.c | 32 +++++-
> drivers/power/supply/axp20x_usb_power.c | 116 ++++++++++++++++++---
> 8 files changed, 197 insertions(+), 22 deletions(-)
> create mode 100644 arch/arm/boot/dts/axp223.dtsi
>

--
Quentin Schulz, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

\
 
 \ /
  Last update: 2016-12-12 09:08    [W:1.595 / U:1.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site