lkml.org 
[lkml]   [2016]   [Dec]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI/ACPI: xgene: Add ECAM quirk for X-Gene PCIe controller
Hi Duc,

On Wed, Nov 30, 2016 at 03:42:53PM -0800, Duc Dang wrote:
> PCIe controllers in X-Gene SoCs is not ECAM compliant: software
> needs to configure additional controller's register to address
> device at bus:dev:function.
>
> The quirk will only be applied for X-Gene PCIe MCFG table with
> OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs).
>
> The quirk declares the X-Gene PCIe controller register space as 64KB
> fixed memory resource with name "PCIe CSR". This name will be showed
> next to the resource range in the output of "cat /proc/iomem".
>
> Signed-off-by: Duc Dang <dhdang@apm.com>
> ---
> v3:
> - Rebase on top of pci/ecam-v6 tree.
> - Use DEFINE_RES_MEM_NAMED to declare controller register space
> with name "PCIe CSR"
> v2:
> RFC v2: https://patchwork.ozlabs.org/patch/686846/
> v1:
> RFC v1: https://patchwork.kernel.org/patch/9337115/
>
> drivers/acpi/pci_mcfg.c | 31 ++++++++
> drivers/pci/host/pci-xgene.c | 165 ++++++++++++++++++++++++++++++++++++++++++-
> include/linux/pci-ecam.h | 7 ++
> 3 files changed, 200 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c
> index ac21db3..eb6125b 100644
> --- a/drivers/acpi/pci_mcfg.c
> +++ b/drivers/acpi/pci_mcfg.c
> @@ -57,6 +57,37 @@ struct mcfg_fixup {
> { "QCOM ", "QDF2432 ", 1, 5, MCFG_BUS_ANY, &pci_32b_ops },
> { "QCOM ", "QDF2432 ", 1, 6, MCFG_BUS_ANY, &pci_32b_ops },
> { "QCOM ", "QDF2432 ", 1, 7, MCFG_BUS_ANY, &pci_32b_ops },
> +
> +#ifdef CONFIG_PCI_XGENE

As you've no doubt noticed, I'm proposing to add these quirks without
CONFIG_PCI_XGENE, so we don't have to select each device when building
a generic ACPI kernel.

I'm also proposing some Kconfig and Makefile changes so we don't build
the platform driver part in a generic ACPI kernel (unless we *also*
explicitly select the platform driver).

Here's an example:
https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/ecam&id=f80edf4d6c05

> +#define XGENE_V1_ECAM_MCFG(rev, seg) \
> + {"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
> + &xgene_v1_pcie_ecam_ops }
> +#define XGENE_V2_1_ECAM_MCFG(rev, seg) \
> + {"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
> + &xgene_v2_1_pcie_ecam_ops }
> +#define XGENE_V2_2_ECAM_MCFG(rev, seg) \
> + {"APM ", "XGENE ", rev, seg, MCFG_BUS_ANY, \
> + &xgene_v2_2_pcie_ecam_ops }
> +
> + /* X-Gene SoC with v1 PCIe controller */
> + XGENE_V1_ECAM_MCFG(1, 0),
> + XGENE_V1_ECAM_MCFG(1, 1),

> @@ -64,6 +66,7 @@
> /* PCIe IP version */
> #define XGENE_PCIE_IP_VER_UNKN 0
> #define XGENE_PCIE_IP_VER_1 1
> +#define XGENE_PCIE_IP_VER_2 2

This isn't used anywhere, which makes me wonder whether it's worth
keeping it.

> static void __iomem *xgene_pcie_get_cfg_base(struct pci_bus *bus)
> {
> - struct xgene_pcie_port *port = bus->sysdata;
> + struct pci_config_window *cfg;
> + struct xgene_pcie_port *port;
> +
> + if (acpi_disabled)
> + port = bus->sysdata;
> + else {
> + cfg = bus->sysdata;
> + port = cfg->priv;
> + }

I would really, really like to figure out a way to get rid of these
"if (acpi_disabled)" checks sprinkled through here. Is there any way
we can set up bus->sysdata to be the same, regardless of whether we're
using this as a platform driver or an ACPI quirk?

> +#ifdef CONFIG_ACPI

You've probably noticed that I've been using

#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)

in this situation, mostly to make it clear that this is part of a
workaround. I don't want people to blindly copy this stuff without
realizing that it's a workaround for a hardware issue.

> +static struct resource xgene_v1_csr_res[] = {
> + [0] = DEFINE_RES_MEM_NAMED(0x1f2b0000UL, SZ_64K, "PCIe CSR"),
> + [1] = DEFINE_RES_MEM_NAMED(0x1f2c0000UL, SZ_64K, "PCIe CSR"),
> + [2] = DEFINE_RES_MEM_NAMED(0x1f2d0000UL, SZ_64K, "PCIe CSR"),
> + [3] = DEFINE_RES_MEM_NAMED(0x1f500000UL, SZ_64K, "PCIe CSR"),
> + [4] = DEFINE_RES_MEM_NAMED(0x1f510000UL, SZ_64K, "PCIe CSR"),

I assume these ranges are not the actual ECAM space, right?
If they *were* ECAM, I assume you would have included them in the
quirk itself in the mcfg_quirks[] table.

> +static int xgene_v1_pcie_ecam_init(struct pci_config_window *cfg)
> +{
> + struct acpi_device *adev = to_acpi_device(cfg->parent);
> + struct acpi_pci_root *root = acpi_driver_data(adev);
> + struct device *dev = cfg->parent;
> + struct xgene_pcie_port *port;
> + struct resource *csr;
> +
> + port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> + if (!port)
> + return -ENOMEM;
> +
> + csr = &xgene_v1_csr_res[root->segment];

This makes me nervous because root->segment comes from the ACPI _SEG,
and if firmware gives us junk in _SEG, we will reference something in
the weeds.

> + port->csr_base = devm_ioremap_resource(dev, csr);
> + if (IS_ERR(port->csr_base)) {
> + kfree(port);
> + return -ENOMEM;
> + }
> +
> + port->cfg_base = cfg->win;
> + port->version = XGENE_PCIE_IP_VER_1;
> +
> + cfg->priv = port;

All these init functions are almost identical. Can we factor this out
by having wrappers that do nothing more than pass in the table and
version, and put the kzalloc and ioremap in a shared back-end?

We're so close I can taste it! I can't wait to see all this work come
to fruition.

Bjorn

\
 
 \ /
  Last update: 2016-12-01 19:35    [W:0.181 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site